C13 and C15 On-highway Engines Caterpillar


Engine Overspeeds

Usage:

C15 B5R
The Engine Control Module (ECM) limits the flow of fuel in order to prevent the engine speed from exceeding 2600 rpm. The following operating conditions can cause the engine speed to exceed this value:

  • An incorrect transmission gear is selected

  • Improper use of an ether starting aid

  • Using gasoline as a fuel

  • Combustible gases enter the engine's air inlet

If the engine speed exceeds 2600 rpm, the ECM illuminates the check engine lamp and a 190-15 code is logged. Factory passwords are required in order to clear the code. No troubleshooting is required.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.