Alternator Mounting
Show/hide table
Illustration 1 | g01715095 |
Note: All the belt running surface of the idler pulleys must be free from paint.
(1) Use the following procedure to tighten five bolts of the support bracket:
- Hand tighten the bolts.
- Again, tighten the bolts to standard torque.
(2) The alternator mounting surfaces of the support bracket must be free from paint.
(3) Before assembly, lubricate the outside surface of the bushings with 4C-5599 Anti-Seize Compound.
(4) Final installation torque for the idler pulleys ...
Note: Assemble the bushing so that the bushing is flush with the surface (5).
(B) Approximate position for the bushing ...
Caterpillar Information System:
C6.6 Engines for Caterpillar Built Machines Piston Cooling Jet
C9-XQ300 Rental Generator Set Cooling System Coolant (ELC) - Change
TH48-E80 Petroleum Transmission Transmission Planetary
C7 and C9 On-Highway Engines Sensor Supply - Test
C13 and C15 On-highway Engines Engine Overspeeds
C7 and C9 On-Highway Engines Oil Pressure Is Low
3126B Petroleum Engine Turbocharger - Disassemble
C15 and C18 Petroleum Generator Sets Engine Performance - Test - Standby Generator Sets
3126B Petroleum Engine Turbocharger - Remove
C32 Marine Engines Turbocharger - Remove
3126B Petroleum Engine Electronic Unit Injector Sleeve - Install
3126B Petroleum Engine Electronic Unit Injector Sleeve - Remove
C32 Marine and Auxiliary Marine Engines Turbocharger - Disassemble
3126B Petroleum Engine Turbocharger - Assemble
C32 Marine and Auxiliary Marine Engines Turbocharger - Assemble
3126B Petroleum Engine Turbocharger - Install
3126B Petroleum Engine Exhaust Manifold - Remove and Install
2005/06/27 New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
C6.6 Engines for Caterpillar Built Machines Fuel Filter Base
C32 Marine Engines Exhaust Manifold - Remove and Install
2005/07/04 Improved Spacer for the Prechamber Group {1106}
Caterpillar 270 Air Compressor No Compression of Air (Unloaded)
Caterpillar 270 Air Compressor General Troubleshooting Information
C13 and C15 On-highway Engines Clean Gas Induction - Test