Glow Plugs
Show/hide table
图 1 | g01332542 |
典型实例 |
拧紧缸盖上的预热塞 (2) 至以下扭矩。 ...
拧紧安装在预热塞顶部的汇流板 (3) 的螺母 (1) 至以下扭矩。 ...
电压 ... 12 或 24 伏
Caterpillar Information System:
C-10 Petroleum Engine Piston Cooling Jets - Remove and Install
C15 On-Highway Engine Engine Oil Filter Base
C-10 Petroleum Engine Cylinder Head - Install
C-10 Petroleum Engine Cylinder Head - Remove
2005/07/04 A New High Temperature Gasket is Now Used {1057}
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C15 On-Highway Engine Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C2.2 Generator Sets Voltage Regulators
C-10 Petroleum Engine Accessory Drive - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Install
C-10 Petroleum Engine Accessory Drive - Remove
C4.4 and C6.6 Engines for Caterpillar Built Machines Electronic Service Tool Will Not Communicate with ECM
C15 On-Highway Engine Cylinder Block
Vane Type Hydraulic Pumps {5055} Vane Type Hydraulic Pumps {5055}
C27 and C32 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
345D, 349D and 349D2 Excavator Machine System Specifications Ether Starting Aid
C-10 Petroleum Engine Fuel Pressure Sensor - Remove and Install
C-10 Petroleum Engine Fuel Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C6.6 Industrial Engine Connecting Rod
12M Motor Grader Cooling System Coolant Sample (Level 2) - Obtain
C-10 Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Atmospheric Pressure Sensor - Remove and Install