A New High Temperature Gasket is Now Used {1057}
- Engine:
- 3126B (S/N: 9ZF581-UP; 3GS223-UP)
- 3176B (S/N: 9WK1-UP; 3NL1-UP)
- 3176C (S/N: 2AW1362-UP; 6BW1-UP)
- 3196 (S/N: 2XR4995-UP; 1DW1-UP)
- 3208 (S/N: 75V1-UP; 01Z1-UP; 03Z1-UP)
- 3304 (S/N: 13E1606-UP; 83Z13297-UP)
- 3304B (S/N: 8XL1-UP; 1PS947-UP)
- 3306 (S/N: 7KF1-UP; 64Z300-UP; 84Z3747-UP; 85Z15706-UP)
- 3306B (S/N: 7JB1-UP; 9SL1-UP; 9NR6050-UP; 1RS873-UP)
- 3406B (S/N: 6TB21610-UP)
- 3406C (S/N: PFH101-UP; 3ER7873-UP; 4ZR8194-UP; KPS518-UP; 1LS1796-UP; 1SS1097-UP)
- 3406E (S/N: 9WR3140-UP)
- 3412E (S/N: 9KS1894-UP; 9PW702-UP)
- C-12 (S/N: 9HP482-UP)
- C12 (S/N: C1Z100-UP)
- C-15 (S/N: BEM1854-UP)
- C18 (S/N: CKH219-UP; C1J180-UP; CYN150-UP)
- C30 (S/N: CLX146-UP)
- C7 (S/N: C7X102-UP)
- C9 (S/N: CSN316-UP)
- D333C (S/N: 09A1-UP)
Show/hide table
Illustration 1 | g01179060 |
A new high temperature gasket is now used. The 4N-3955 Gasket is replaced by the 255-6863 Gasket (1). The 255-6863 Gasket provides a much higher temperature tolerance for the current engines. The new gasket is also a one crush gasket. The gasket needs to be aligned with the exhaust system before the four mounting clips are tightened to the turbocharger.
Caterpillar Information System:
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C15 On-Highway Engine Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C2.2 Generator Sets Voltage Regulators
C-10 Petroleum Engine Accessory Drive - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Install
C-10 Petroleum Engine Accessory Drive - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Cranks but Will Not Start
C13, C15, and C18 Tier 4 Final Engines Vibration Damper and Pulley
C-10 Petroleum Engine Housing (Front) - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Remove
C-10 Petroleum Engine Crankshaft Front Seal - Install
C-10 Petroleum Engine Cylinder Head - Remove
C-10 Petroleum Engine Cylinder Head - Install
C15 On-Highway Engine Engine Oil Filter Base
C-10 Petroleum Engine Piston Cooling Jets - Remove and Install
C7.1 (Mech) Industrial Engine Glow Plugs
C4.4 and C6.6 Engines for Caterpillar Built Machines Electronic Service Tool Will Not Communicate with ECM
C15 On-Highway Engine Cylinder Block
Vane Type Hydraulic Pumps {5055} Vane Type Hydraulic Pumps {5055}
C27 and C32 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
345D, 349D and 349D2 Excavator Machine System Specifications Ether Starting Aid
C-10 Petroleum Engine Fuel Pressure Sensor - Remove and Install
C-10 Petroleum Engine Fuel Temperature Sensor - Remove and Install