Fuel Injection Nozzles
Show/hide table
Illustration 1 | g01344657 |
Refer to the Operation and Maintenance manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.
Note: Refer to Systems Operation, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
(1) Tighten the nuts to the following torque.
(2) Tighten the bolt in the clamp for the fuel injection nozzle to the following torque. ...
(3) Clamp
(4) O ring seal
Caterpillar Information System:
C15 On-Highway Engine Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C2.2 Generator Sets Voltage Regulators
C-10 Petroleum Engine Accessory Drive - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Install
C-10 Petroleum Engine Accessory Drive - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Cranks but Will Not Start
C13, C15, and C18 Tier 4 Final Engines Vibration Damper and Pulley
C-10 Petroleum Engine Housing (Front) - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Remove
C-10 Petroleum Engine Crankshaft Front Seal - Install
C15 On-Highway Engine Vibration Damper and Pulley
2005/07/04 A New High Temperature Gasket is Now Used {1057}
C-10 Petroleum Engine Cylinder Head - Remove
C-10 Petroleum Engine Cylinder Head - Install
C15 On-Highway Engine Engine Oil Filter Base
C-10 Petroleum Engine Piston Cooling Jets - Remove and Install
C7.1 (Mech) Industrial Engine Glow Plugs
C4.4 and C6.6 Engines for Caterpillar Built Machines Electronic Service Tool Will Not Communicate with ECM
C15 On-Highway Engine Cylinder Block
Vane Type Hydraulic Pumps {5055} Vane Type Hydraulic Pumps {5055}
C27 and C32 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
345D, 349D and 349D2 Excavator Machine System Specifications Ether Starting Aid
C-10 Petroleum Engine Fuel Pressure Sensor - Remove and Install