Engine Oil Filter Base
Show/hide table
Illustration 1 | g01302874 |
Engine oil filter base |
(1) 4N-8150 Spring
- Quantity ... 2
- Length under test force ... 55.24 mm (2.1750 inch)
- Test force ... 75.619 ± 5.8 N (17 ± 1.30 lb)
- Free length after test ... 93.726 mm (3.6810 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- Length under test force ... 55.24 mm (2.1750 inch)
The oil cooler bypass valve and the oil filter bypass valve must open with a pressure difference of 240 ± 20 kPa (35.0 ± 3.0 psi).
(2) Torque for two O-ring plugs ... 100 ± 15 N·m (75 ± 11 lb ft)
(3) Torque for the hollow stud ... 68 ± 7 N·m (50 ± 5 lb ft)
Note: Apply 6V-6640 Sealant to the top 11.0 ± 2.0 mm (0.43 ± 0.08 inch) of the hollow stud threads.
Caterpillar Information System:
C-10 Petroleum Engine Cylinder Head - Install
C-10 Petroleum Engine Cylinder Head - Remove
2005/07/04 A New High Temperature Gasket is Now Used {1057}
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C15 On-Highway Engine Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C2.2 Generator Sets Voltage Regulators
C-10 Petroleum Engine Accessory Drive - Install
C9 Engine for Caterpillar Built Machines Pump Drive - Install
C-10 Petroleum Engine Accessory Drive - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Cranks but Will Not Start
C13, C15, and C18 Tier 4 Final Engines Vibration Damper and Pulley
C-10 Petroleum Engine Piston Cooling Jets - Remove and Install
C7.1 (Mech) Industrial Engine Glow Plugs
C4.4 and C6.6 Engines for Caterpillar Built Machines Electronic Service Tool Will Not Communicate with ECM
C15 On-Highway Engine Cylinder Block
Vane Type Hydraulic Pumps {5055} Vane Type Hydraulic Pumps {5055}
C27 and C32 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
345D, 349D and 349D2 Excavator Machine System Specifications Ether Starting Aid
C-10 Petroleum Engine Fuel Pressure Sensor - Remove and Install
C-10 Petroleum Engine Fuel Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C6.6 Industrial Engine Connecting Rod
12M Motor Grader Cooling System Coolant Sample (Level 2) - Obtain