Install Muffler With Drain Hole Down{1062}
Usage:
All Products With Mufflers
Some mufflers have a small drain hole in the end cap. This allows water entering from the outside, to drain from the muffler and avoid damage to the engine exhaust piping.
Install the new muffler with the end cap having the words "DRAIN HOLE DOWN" located in the lowest possible position. This will permit the water to drain from the muffler drain hole and prevent damage to the exhaust piping.
Caterpillar Information System:
1984/05/07 New Hoses In Water Lines Group Give Better Performance At Higher Temperatures; New Hose Clamps Also Used{1050,1059,1350}
1984/04/23 Correct Oil Level And End Play Settings For Marine Transmission{3303,3305,3354}
1984/04/23 Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23 Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23 3406 Remanufactured Truck Engines Available{1000}
1984/04/16 Piston For Rectangular Rings Available Again{1214,1215}
1984/04/16 New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16 How To Recognize And Reduce The Effect Of Moisture On SR4 Generator Windings{4450,4453,4454}
1984/04/09 New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09 Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09 Bypass Valve Can Be Installed To Keep Prelubrication Oil At The Correct Level{1319}
1984/05/07 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/14 Gasket Changed For Cylinder Block Side Cover{1201,1362}
1984/05/14 New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14 New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14 Vehicle Electrical System Can Have Power When The Disconnect Switch Is In The Off Positon{0353,1400}
1984/05/21 Improved Cylinder Head Gasket{1101,1201}
1984/05/21 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products{0600,0690}
1984/05/21 Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21 New Pulley Group With Tapered Bearings{1358}
1984/05/21 Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21 Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts{1202,1218}