New Hoses In Water Lines Group Give Better Performance At Higher Temperatures; New Hose Clamps Also Used{1050,1059,1350}
Usage:
3208 Industrial And Marine Engines ( 75V, 1Z, 3Z ) Equipped With Water Cooled Exhaust Manifolds
Description of Change: Some hoses in the water lines group on the above engines are made with an improved material. The new hoses give better resistance to damage from high temperature. The new hoses are green in color while the former hoses were black.
A new hose clamp is used with these hoses. The new clamp has a protective inner liner that helps keep the hose tight.
Adaptable As: The new hoses and clamp are direct replacements for the former hoses and clamp as shown in the chart.
Location of new hoses and clamps.
Caterpillar Information System:
1984/04/23 Correct Oil Level And End Play Settings For Marine Transmission{3303,3305,3354}
1984/04/23 Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23 Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23 3406 Remanufactured Truck Engines Available{1000}
1984/04/16 Piston For Rectangular Rings Available Again{1214,1215}
1984/04/16 New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16 How To Recognize And Reduce The Effect Of Moisture On SR4 Generator Windings{4450,4453,4454}
1984/04/09 New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09 Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09 Bypass Valve Can Be Installed To Keep Prelubrication Oil At The Correct Level{1319}
1984/04/02 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders {0623}
1984/05/07 Install Muffler With Drain Hole Down{1062}
1984/05/07 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/14 Gasket Changed For Cylinder Block Side Cover{1201,1362}
1984/05/14 New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14 New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14 Vehicle Electrical System Can Have Power When The Disconnect Switch Is In The Off Positon{0353,1400}
1984/05/21 Improved Cylinder Head Gasket{1101,1201}
1984/05/21 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products{0600,0690}
1984/05/21 Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21 New Pulley Group With Tapered Bearings{1358}
1984/05/21 Quadrants Improved In Governor Control Groups{1265,1264}