Gear Group (Front) - Install
Show/hide table
Alat yang Diperlukan | |||
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 8S-2241 | Grup Alat Bearing Camshaft | 1 |
6V-4869 | Adapter | 1 | |
6V-6174 | Sumbat | 1 |
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Gunakan Peralatan (A) untuk memasang bushing (8) dan (9). Pasang bushing (8) ke Dimensi (B). Dimensi (B) adalah
236.7 ± 0.5 mm (9.32 ± 0.02 inch) . Pasang bushing (9) ke Dimensi (A). Dimensi (A) adalah40.4 ± 0.5 mm (1.59 ± 0.02 inch) . Pasang crankshaft. Rujuk ke Pembongkaran dan Perakitan, "Crankshaft - Pemasangan". - Oleskan oli engine yang bersih ke poros (7), lubang bearing, dan permukaan dorong sebelum pemasangan. Pasang poros (7) dan baut (6). Kencangkan baut (6) dengan torsi pengencangan
55 ± 10 N·m (41 ± 7 lb ft) .Show/hide tableIlustrasi 3 g01147593 - Letakkan rakitan roda-gigi (1) pada poros. Pasang pelat (2) dan baut (3).
- Pasang rakitan roda-gigi (4) dan baut (5).
Show/hide table
Ilustrasi 1 | g03729299 |
Show/hide table
Ilustrasi 2 | g03729282 |
Diakhiri dengan:
- Pasang rumah depan. Rujuk ke Pembongkaran dan Perakitan, "Rumah (Depan) - Pemasangan".
Caterpillar Information System:
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install - Type 1
3512C Oil Well Service Engines Model View Illustrations
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C4.4 Generator Sets Engine - Clean
C27 and C32 Generator Set Engines Valve Mechanism Cover - Remove and Install
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C3.3 and C4.4 Generator Sets Generator Lead Connections
G3516C and G3516E Gas Engines Turbocharger
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Remove
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Install