New Flash Files Are Available For Cold Mode Starting Strategy {7620}
- Engine:
- 3412E (S/N: 4CR1960-UP; BDT1493-UP)
The above engines now have a new parameter. The parameter is a selectable cold mode start strategy. Engines with high parasitic loads have a hard time starting with the cold mode starting strategy on. The new flash files will allow the operator to turn the cold mode starting strategy on or off. This feature is only available for the version "D" 156-7172 Engine Electronic Control Gp. The updated flash files for the selectable cold mode starting strategy are shown in Table 1.
Show/hide table
| Flash Files for the version "D" 156-7172 Engine Electronic Control Gp | |
|---|---|
| Old Flash File | Updated Flash File |
| 249-1231 Engine Ratings Electronic Software | 263-4035 Electronic Software |
| 249-1232 Engine Ratings Electronic Software | 263-4036 Electronic Software |
| 249-1233 Engine Ratings Electronic Software | 263-4037 Electronic Software |
| 249-1228 Engine Ratings Electronic Software | 263-4032 Electronic Software |
| 249-1227 Engine Ratings Electronic Software | 263-4031 Electronic Software |
| 249-1229 Engine Ratings Electronic Software | 263-4033 Electronic Software |
| 249-1230 Engine Ratings Electronic Software | 263-4034 Electronic Software |
| 249-1234 Engine Ratings Electronic Software | 263-4038 Electronic Software |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C3.3 and C4.4 Generator Sets Generator Set Identification
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C15 Generator Set Engines E363 High Fuel Supply Temperature
D Series Excavator Monitoring System Maintenance Information Mode
120M, 12M, 140M and 160M Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
3512C Oil Well Service Engines Model View Illustrations
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install