Maintenance Information Mode
用户可以使用 "MAINTENANCE INFO（保养信息）"菜单查看系统部件列表的累积小时数和建议的间隔时间。
Show/hide table
 | |
| 图 1 | g01152977 |
(8) 向上键 (9) 向右键 (10) 主页键 (11) 主菜单键 (12) 向左键 (13) 向下键 (14) 取消键或返回键 (15) OK 键 | |
从 "MAIN MENU（主菜单）"中选择 "MAINTENANCE INFO（保养信息）"可进入 "MAINTENANCE INFO（保养信息）"菜单选项。 按向左键 (12) 或向右键 (9) ，直到 "MAINTENANCE INFO（保养信息）"突出显示，以便选择此选项。 然后按下"确定"键 (15) 。 请参阅插图 2。
Show/hide table
 | |
| 图 2 | g01147976 |
注: 按主菜单键 (11) 可从任何屏幕显示 "MAIN MENU（主菜单）"。
现在将显示以下屏幕。
Show/hide table
 | |
| 图 3 | g01148194 |
(XXXX) 累计小时数 (YYYY) 建议的保养周期 | |
从 "MAINTENANCE INFO（保养信息）"菜单，使用相应的向上键 (8) 或向下键 (13) 浏览列出的系统部件信息。
请参阅表 1 以获得 "MAINTENANCE INFO（保养信息）"菜单中可用的系统部件列表。
Show/hide table
| 保养信息列表 | |||
|---|---|---|---|
| 显示器 | 345C 320D 324D 325D 330D |
365C 385C |
详细信息 |
| "冷却液" | X | X | 冷却液的累积小时数 |
| "液压油" | X | X | 液压油的累积小时数 |
| "发动机机油" | X | X | 发动机机油的累积小时数 |
| "SWING DRIVE OIL（回转驱动机油）" | X | X | 回转驱动机油的累积小时数 |
| "FINAL DRIVE OIL（最终传动机油）" | X | X | 终传动机油的累积小时数 |
| "油水分离器" | X | X | 油水分离器的累积小时数 |
| "发动机机油滤清器" | X | X | 发动机机油滤清器的累积小时数 |
| "燃油滤清器" | X | X | 燃油滤清器的累积小时数 |
| "先导油滤清器" | X | X | 先导油滤清器的累积小时数 |
| "DRAIN OIL FILTER（排油滤清器）" | X | X | 排油滤清器的累积小时数 |
| "液压油回油滤清器" | X | X | 液压油回油滤清器的累积小时数 |
| "ATT FILTER（附件滤清器）" | X | X | 附件液压油滤清器的累积小时数 |
| "ENGINE（发动机）" | X | X | 发动机的累积小时数 |
| "泵" | X | X | 泵的累积小时数 |
| "行驶马达" | X | X | 行驶马达的累积小时数 |
| "回转马达" | X | 回转马达的累积小时数 | |
| "#01 机具" | X | X | 机具 01 的累积小时数 |
| "#02 机具" | X | X | 机具 02 的累积小时数 |
| "#03 机具" | X | X | 机具 03 的累积小时数 |
| "#04 机具" | X | X | 机具 04 的累积小时数 |
| "#05 机具" | X | 机具 05 的累积小时数 | |
Caterpillar Information System:
120M, 12M, 140M and 160M Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
C13 Engines for Caterpillar Built Machines Event Codes
3054E Industrial Engine Fuel Injection Nozzle Cover - Remove and Install
C27 and C32 Generator Set Engines Housing (Rear) - Remove
C4.4 Marine Generator Set Generator Operation
XQ60 Rental Generator Set Generator Set Installation
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
120M, 12M, 140M and 160M Motor Graders Transmission Pressures - Test and Adjust
XQ60 Rental Generator Set Insulation - Test
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator - Dry
120M, 12M, 140M and 160M Motor Graders Power Train Charge System Pressure - Test and Adjust
C15 Generator Set Engines E363 High Fuel Supply Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C3.3 and C4.4 Generator Sets Generator Set Identification
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
C4.4 Generator Sets Alternator - Inspect
G3520C and G3520E Engines Air Lines - Compressor Bypass
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
3512C Oil Well Service Engines Model View Illustrations