Fuel Injection Nozzle Cover - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean all of the outer surfaces of the cover (1) for the fuel injection nozzles.
- Remove the setscrews (2) from the cover (1).
- Remove the cover (1).
Show/hide table
| |
| Illustration 1 | g01011111 |
|
Typical example | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean all of the inner surfaces of the cover (1) for the fuel injection nozzles.
- Install the cover (1).
- Install the setscrews (2) for the cover (1). Tighten the setscrews (2) to a torque of
9 N·m (7 lb ft) .
Show/hide table
|
| |
| Illustration 2 | g01011111 |
|
Typical example | |
Caterpillar Information System:
C27 and C32 Generator Set Engines Housing (Rear) - Remove
C4.4 Marine Generator Set Generator Operation
XQ60 Rental Generator Set Generator Set Installation
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
120M, 12M, 140M and 160M Motor Graders Transmission Pressures - Test and Adjust
XQ60 Rental Generator Set Insulation - Test
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator - Dry
120M, 12M, 140M and 160M Motor Graders Power Train Charge System Pressure - Test and Adjust
XQ60 Rental Generator Set Rotating Rectifier - Test
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C13 Engines for Caterpillar Built Machines Event Codes
120M, 12M, 140M and 160M Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
D Series Excavator Monitoring System Maintenance Information Mode
C15 Generator Set Engines E363 High Fuel Supply Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C3.3 and C4.4 Generator Sets Generator Set Identification
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
C4.4 Generator Sets Alternator - Inspect
G3520C and G3520E Engines Air Lines - Compressor Bypass
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove