Rear Power Take-Off (RPTO) - Install
Show/hide table
| Alat yang Diperlukan | |||
| Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
| A | 6V-4073 | Kunci Spanner | 1 |
| B | 138-7574 | Bracket Sambungan | 1 |
- Pasang Alat (B) dan peralatan pengangkat yang sesuai ke penggerak pompa (4). Penggerak pompa (4) memiliki bobot sekitar
32 kg (70 lb) . Pasang penggerak pompa (4). - Pasang baut (3) dan mur (1). Gunakan Alat (A) untuk mengencangkan mur (1). Kencangkan mur (1) dengan torsi
406 ± 68 N·m (299 ± 50 lb ft) . Tekuk tab pengunci di posisi kunci (2) ke slot mur (1).
Show/hide table
| |
| Ilustrasi 1 | g01151575 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C3.3 and C4.4 Generator Sets Generator Set Identification
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C15 Generator Set Engines E363 High Fuel Supply Temperature
D Series Excavator Monitoring System Maintenance Information Mode
120M, 12M, 140M and 160M Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
C13 Engines for Caterpillar Built Machines Event Codes
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
3512C Oil Well Service Engines Model View Illustrations
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display