Vibration Damper and Pulley - Remove and Install - Type 1
Prosedur Pelepasan
Show/hide table
Alat yang Diperlukan     | |||
Alat     | Nomor Suku Cadang     | Keterangan Suku Cadang     | Jml     |
A     | -     | Stud Pengarah 1/2 - 13 NC x 3 in     |
2     |
- Lepaskan sabuk dari engine.
- Lepaskan baut (1) dan puli (2) .
Show/hide table
Ilustrasi 1 | g01147370 |
Show/hide table
Ilustrasi 2 | g01147374 |
- Lepaskan dua baut (3) dan pasang Alat (A) .
- Lepaskan sisa baut (3) dan spacer (4) .
- Pasang peralatan pengangkat yang sesuai ke peredam getaran (5). Peredam getaran (5) memiliki bobot sekitar 34 kg (75 lb). Lepaskan peredam getaran (5) dari adaptor.
Prosedur Pemasangan
Show/hide table
Alat yang Diperlukan     | |||
Alat     | Nomor Suku Cadang     | Keterangan Suku Cadang     | Jml     |
A     | -     | Stud Pengarah 1/2 - 13 NC x 3 in     |
2     |
- Pasang Alat (A) pada adaptor.
Show/hide table
Ilustrasi 3 | g01147374 |
Show/hide table
Ilustrasi 4 | g01147370 |
- Pasang peralatan pengangkat yang sesuai ke peredam getaran (5). Peredam getaran (5) memiliki bobot sekitar 34 kg (75 lb). Letakkan peredam getaran (5) pada adaptor.
- Pasang spacer (4) dan baut (3). Lepaskan Alat (A) .
- Pasang sisa baut (3). Kencangkan baut (3) dengan torsi 135 ± 20 N·m (100 ± 15 lb ft).
- Pasang puli (2) dan baut (1) .
- Pasang sabuk pada engine.
Caterpillar Information System:
3512C Oil Well Service Engines Model View Illustrations
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C3.3 and C4.4 Generator Sets Generator Set Identification
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C15 Generator Set Engines E363 High Fuel Supply Temperature
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C4.4 Generator Sets Engine - Clean