Crankshaft Front Seal - Remove
Show/hide table
Alat yang Diperlukan | |||
---|---|---|---|
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 1U-7600 | Alat Penarik Slide Hammer | 1 |
B | - | Batang Pengungkit | 1 |
C | 5P-7312 | Distorter Seal | 1 |
D | 5P-7314 | Ring Distorter | 1 |
Dimulai dengan:
- Lepaskan peredam getaran crankshaft dan puli. Rujuk ke Pembongkaran dan Perakitan, "Peredam Getaran dan Puli - Pelepasan dan Pemasangan".
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Lepaskan baut (1) dan adaptor (2).
Show/hide table
Ilustrasi 2 g01513439 Catatan: Pastikan Anda tidak merusak rumah depan dengan Alat (B).
Catatan: Bila selongsong aus crankshaft mulai bergeser dari crankshaft, lanjutkan ke Langkah 3.
- Gunakan Alat (B) untuk mengungkit bibir selongsong aus crankshaft (3).
- Gunakan Alat (A) untuk membuat tiga atau lebih lubang di seal depan crankshaft (4).
- Gunakan Alat (A) untuk melepaskan seal depan crankshaft (4).
- Bila diperlukan, gunakan Alat (C) dan Alat (D) untuk melepaskan selongsong aus crankshaft (3).
Show/hide table
Ilustrasi 1 | g01098057 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install - Type 1
3512C Oil Well Service Engines Model View Illustrations
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C3.3 and C4.4 Generator Sets Generator Set Identification
C27 and C32 Industrial and Petroleum Engines E445 High Auxiliary Temperature
C27 and C32 Industrial and Petroleum Engines E443 High Auxiliary Pressure
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C4.4 Generator Sets Engine - Clean
C27 and C32 Generator Set Engines Valve Mechanism Cover - Remove and Install