C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Crankshaft Front Seal - Install

Usage:

854K 221

Prosedur Pemasangan

Tabel 1
Alat yang Diperlukan 
Alat  Nomor Suku Cadang  Keterangan Suku Cadang  Jml 
5P-1733  Locator Seal 
5P-1737 Baut 
9S-8858 Mur (Pemasang Seal) 
6V-6142 Pemasang Seal 


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.


  1. Bersihkan bagian luar diameter crankshaft.


    Ilustrasi 1g01513455

  2. Gunakan Alat (E) untuk memasang seal depan crankshaft (4) dan selongsong aus crankshaft (3) sebagai satu unit.

    Catatan: Pasang seal depan crankshaft dengan tanda panah yang menunjukkan arah rotasi crankshaft mengarah ke bagian depan engine.



    Ilustrasi 2g01098057

  3. Pasang adaptor (2) dan baut (1).

Diakhiri dengan:

  1. Pasang peredam getaran crankshaft dan puli. Rujuk ke Pembongkaran dan Perakitan, "Peredam Getaran dan Puli - Pelepasan dan Pemasangan".

Caterpillar Information System:

C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install - Type 1
3512C Oil Well Service Engines Model View Illustrations
2005/02/28 New Flash Files Are Available For Cold Mode Starting Strategy {7620}
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3520C and G3520E Engines Air Lines - Compressor Bypass
C4.4 Generator Sets Alternator - Inspect
C27 and C32 Generator Set Engines Housing (Rear) - Install
3512C HD SR500 Generator Sets Generator Set Vibration - Inspect
C3.3 and C4.4 Generator Sets Generator Set Identification
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
UPS View User Guide General Information (System Overview)
UPS View User Guide Display
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C4.4 Generator Sets Engine - Clean
C27 and C32 Generator Set Engines Valve Mechanism Cover - Remove and Install
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C3.3 and C4.4 Generator Sets Generator Lead Connections
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.