Valve Mechanism Cover Base - Remove and Install
Dimulai dengan:
- Lepaskan penutup mekanisme katup. Rujuk ke Pembongkaran dan Perakitan, "Penutup Mekanisme Katup - Pelepasan dan Pemasangan".
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Lepaskan susunan pipa (1).
- Putuskan susunan pipa (5) dan susunan rangkaian kabel (2).
- Lepaskan baut (4).
- Lepaskan dudukan penutup mekanisme katup (3) dan seal dari cylinder head.
Show/hide table
| |
| Ilustrasi 1 | g01147965 |
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Pasang seal pada dudukan penutup mekanisme katup (3).
- Letakkan dudukan penutup mekanisme katup (3) pada cylinder head dan pasang baut (4).
- Letakkan susunan rangkaian kabel (5) pada injektor unit elektronik. Kencangkan mur tutup dengan torsi
2,5 ± 0,25 N·m (22 ± 2 lb in) . - Sambungkan susunan rangkaian kabel (2).
- Pasang susunan pipa (1).
Show/hide table
|
| |
| Ilustrasi 2 | g01147965 |
Diakhiri dengan:
- Pasang penutup mekanisme katup. Rujuk ke Pembongkaran dan Perakitan, "Penutup Mekanisme Katup - Pelepasan dan Pemasangan".
Caterpillar Information System:
C27 and C32 Generator Set Engines Valve Mechanism Cover - Remove and Install
C4.4 Generator Sets Engine - Clean
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
UPS View User Guide Display
UPS View User Guide General Information (System Overview)
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove
C27 and C32 Generator Set Engines Gear Group (Front) - Install
C27 and C32 Generator Set Engines Gear Group (Front) - Remove
C3.3 and C4.4 Generator Sets Cooling System Coolant (ELC) - Change
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C-10 and C-15 Petroleum Engines Diagnostic Code Cross Reference
C3.3 and C4.4 Generator Sets Generator Lead Connections
G3516C and G3516E Gas Engines Turbocharger
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Remove
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Install
2005/03/07 260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
330F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Swing Pressure)
C27 and C32 Engines for Caterpillar Built Machines Engine Trunnion - Remove and Install
C27 and C32 Industrial and Petroleum Engines Fuel Filter and Water Separator
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C32
2005/02/28 Improved Mounting for the Radiator Is Now Used {1353}
UPS View User Guide Tile Arrangement
C3.3 and C4.4 Generator Sets Engine Oil and Filter - Change