Relief Valve (Swing Pressure)
Show/hide table
图 1 | g01148106 |
(1) 阀组的扭矩 ... 176 ± 10 N·m (130 ± 7 lb ft)
(2) 螺塞的扭矩 ... 98 ± 9.8 N·m (72 ± 7 lb ft)
(3) 锁定螺母的扭矩 ... 117.6 ± 9.8 N·m (87 ± 7 lb ft)
(4) 191-3201 弹簧
- 自由长度 ... 49 mm (1.93 in)
- 外径 ... 22.2 mm (0.87 in)
Caterpillar Information System:
2005/03/07 260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Install
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Remove
G3516C and G3516E Gas Engines Turbocharger
C3.3 and C4.4 Generator Sets Generator Lead Connections
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C27 and C32 Generator Set Engines Valve Mechanism Cover - Remove and Install
C4.4 Generator Sets Engine - Clean
3126B Industrial Engines CID 0094 FMI 04 Fuel Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Install
UPS View User Guide Display
UPS View User Guide General Information (System Overview)
C27 and C32 Engines for Caterpillar Built Machines Engine Trunnion - Remove and Install
C27 and C32 Industrial and Petroleum Engines Fuel Filter and Water Separator
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C32
2005/02/28 Improved Mounting for the Radiator Is Now Used {1353}
UPS View User Guide Tile Arrangement
C3.3 and C4.4 Generator Sets Engine Oil and Filter - Change
UPS View User Guide Display Configuration
UPS View User Guide Font Setting
UPS View User Guide Log On
UPS View User Guide General Information (Getting Started)
UPS View User Guide Communication Connections
C9 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install