Turbocharger - Disassemble
Disassembly Procedure
Start By:
- Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Mark the turbocharger housings for alignment upon assembly.
Show/hide table
Illustration 1 | g01142530 |
- Disconnect hose (5) from compressor cover (4) .
- Loosen clamp (1) and clamp (2) .
- Remove compressor cover (4) from cartridge assembly (6) .
- Remove turbine housing (3) from cartridge assembly (6) .
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Engine Oil Pan - Disassemble
3500 Engines Engine Oil Pan - Assemble
C9 Engine For Caterpillar Built Machines Flywheel - Install
C9 Engine For Caterpillar Built Machines Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
12M Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Exhaust Temperature - Test
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Air in Fuel - Test
C4.4 (Mech) Industrial Engine Cooling System - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Quality - Test
C9 Urban Transit Bus Engine Turbocharger - Assemble
3512B SR4B Generator Sets Generator - Inspect
C4.4 Generator Sets Product Lifting
C11 and C13 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems Wheel Mounting
XQ60 Rental Generator Set Product Storage
C11 and C13 Industrial Engines Fuel Filter Base - Remove and Install
AMPSEAL 16 ConnectorSystem{7553} AMPSEAL 16 ConnectorSystem{7553}
C11 and C13 Petroleum Engines Fuel Transfer Pump - Remove
C11 and C13 Petroleum Engines Fuel Transfer Pump - Install
C11 and C13 Industrial Engines Turbocharger - Remove