Wheel Mounting
Show/hide table
Illustration 1 | g06339416 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 60 | 7X-2575 Bolt | Use any one of the following torque to tighten the bolt: Tighten the bolt to or 1. Tighten the bolt to 2. Tighten bolts to an additional turn of 30 ± 1 degrees. |
Caterpillar Information System:
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift Cylinder Mounting
C11 and C13 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
C4.4 Generator Sets Product Lifting
3512B SR4B Generator Sets Generator - Inspect
C9 Urban Transit Bus Engine Turbocharger - Assemble
C9 Urban Transit Bus Engine Turbocharger - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pan - Disassemble
3500 Engines Engine Oil Pan - Assemble
C9 Engine For Caterpillar Built Machines Flywheel - Install
C9 Engine For Caterpillar Built Machines Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
12M Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
XQ60 Rental Generator Set Product Storage
C11 and C13 Industrial Engines Fuel Filter Base - Remove and Install
AMPSEAL 16 ConnectorSystem{7553} AMPSEAL 16 ConnectorSystem{7553}
C11 and C13 Petroleum Engines Fuel Transfer Pump - Remove
C11 and C13 Petroleum Engines Fuel Transfer Pump - Install
C11 and C13 Industrial Engines Turbocharger - Remove
C11 and C13 Industrial Engines Turbocharger - Install
C11 and C13 Industrial Engines Exhaust Manifold - Remove and Install
Using Caterpillar Replacement Thread Inserts {0676} Using Caterpillar Replacement Thread Inserts {0676}
C27 and C32 Engines for Caterpillar Built Machines Engine Wiring Information
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Remove - C32