120M, 12M, 140M and 160M Motor Graders Machine Systems Caterpillar


Blade Lift Cylinder Mounting

Usage:

12M B92


Illustration 1g01143068


Illustration 2g01176276

Table 1
Specification for 263-2787 Blade Lift Cylinder and Mounting 
Item  Qty  Part  Specification Description 
Bolts  Torque to 115 ± 7 N·m (85 ± 5 lb ft) 
Hand pack the cap with 9X-6489 Lubricant. 
279-5268 Shim  Thickness of 0.5 mm (0.020 inch) 
Refer to Operation and Maintenance Manual, "Center Cylinder Socket - Check/Adjust/Replace" for information regarding the adjustment of the blade lift cylinder socket. 

Caterpillar Information System:

C11 and C13 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
C4.4 Generator Sets Product Lifting
3512B SR4B Generator Sets Generator - Inspect
C9 Urban Transit Bus Engine Turbocharger - Assemble
C9 Urban Transit Bus Engine Turbocharger - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pan - Disassemble
3500 Engines Engine Oil Pan - Assemble
C9 Engine For Caterpillar Built Machines Flywheel - Install
C9 Engine For Caterpillar Built Machines Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
12M Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Exhaust Temperature - Test
120M, 12M, 140M and 160M Motor Graders Machine Systems Wheel Mounting
XQ60 Rental Generator Set Product Storage
C11 and C13 Industrial Engines Fuel Filter Base - Remove and Install
AMPSEAL 16 ConnectorSystem{7553} AMPSEAL 16 ConnectorSystem{7553}
C11 and C13 Petroleum Engines Fuel Transfer Pump - Remove
C11 and C13 Petroleum Engines Fuel Transfer Pump - Install
C11 and C13 Industrial Engines Turbocharger - Remove
C11 and C13 Industrial Engines Turbocharger - Install
C11 and C13 Industrial Engines Exhaust Manifold - Remove and Install
Using Caterpillar Replacement Thread Inserts {0676} Using Caterpillar Replacement Thread Inserts {0676}
C27 and C32 Engines for Caterpillar Built Machines Engine Wiring Information
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.