Fuel Transfer Pump - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fuel transfer pump (4).
- Install bolts (2).
- Connect tube assembly (3).
- Connect hose assembly (1).
Show/hide table
Illustration 1 | g01143401 |
Caterpillar Information System:
C11 and C13 Petroleum Engines Fuel Transfer Pump - Remove
AMPSEAL 16 ConnectorSystem{7553} AMPSEAL 16 ConnectorSystem{7553}
C11 and C13 Industrial Engines Fuel Filter Base - Remove and Install
XQ60 Rental Generator Set Product Storage
120M, 12M, 140M and 160M Motor Graders Machine Systems Wheel Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift Cylinder Mounting
C11 and C13 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
C4.4 Generator Sets Product Lifting
3512B SR4B Generator Sets Generator - Inspect
C9 Urban Transit Bus Engine Turbocharger - Assemble
C9 Urban Transit Bus Engine Turbocharger - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pan - Disassemble
C11 and C13 Industrial Engines Turbocharger - Remove
C11 and C13 Industrial Engines Turbocharger - Install
C11 and C13 Industrial Engines Exhaust Manifold - Remove and Install
Using Caterpillar Replacement Thread Inserts {0676} Using Caterpillar Replacement Thread Inserts {0676}
C27 and C32 Engines for Caterpillar Built Machines Engine Wiring Information
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Install - C32
C27 and C32 Generator Set Engines Fuel Transfer Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Replacing the ECM
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C11 and C13 Industrial Engines Engine Oil Cooler - Remove