C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Caterpillar


Exhaust Temperature - Test

Usage:

CB-214E 214

测量排气温度

表 1
所需工具 
零件号  零件名称  数量 
164-3310  激光红外线温度计 

当发动机在低怠速运转时,排气歧管端口温度可显示喷油嘴的状况。

温度低表明没有燃油喷入该气缸内。 喷油嘴不工作或喷油泵有故障都可能造成这种低温。

温度非常高可能表明太多的燃油喷入该气缸。 喷油嘴故障可能会造成这种极高温现象。

使用 164-3310 激光红外线温度计检查各气缸排气口处的排气温度。

对比各排气口的温度读数。 调查温度读数的差异。

Caterpillar Information System:

3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Air in Fuel - Test
C4.4 (Mech) Industrial Engine Cooling System - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Quality - Test
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Install
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Fan Motor (Hydraulic and Radiator Cooling)
C27 and C32 Engines for Caterpillar Built Machines E362 Engine Overspeed
C27 and C32 Generator Set Engines E361 High Engine Coolant Temperature
C27 and C32 Engines for Caterpillar Built Machines E194 High Exhaust Temperature
12M Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C9 Engine For Caterpillar Built Machines Flywheel - Remove
C9 Engine For Caterpillar Built Machines Flywheel - Install
3500 Engines Engine Oil Pan - Assemble
3508C, 3512C and 3516C Marine Engines Engine Oil Pan - Disassemble
C9 Urban Transit Bus Engine Turbocharger - Disassemble
C9 Urban Transit Bus Engine Turbocharger - Assemble
3512B SR4B Generator Sets Generator - Inspect
C4.4 Generator Sets Product Lifting
C11 and C13 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift Cylinder Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.