Water Pump - Remove
- Kuras sistem cairan pendingin. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas Pengisian Ulang dan Rekomendasi".
Show/hide table
Ilustrasi 1 g01132004 - Putuskan rakitan selang (1).
- Lepaskan baut (2).
- Lepaskan rumah (3).
- Lepaskan bracket (4).
- Lepaskan rakitan pipa (5).
Show/hide table
Ilustrasi 2 g01132005 - Lepaskan rakitan pipa (6).
- Lepaskan tensioner sabuk (7).
- Lepaskan baut (8).
- Lepaskan pompa air (9).
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
Show/hide table
| PERHATIAN |
|---|
|
Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan. |
Caterpillar Information System:
2004/12/01 A New PEEC Transducer Module is now Used {1917}
3508B, 3512B and 3516B Generator Set Engines Housing (Front) - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
3508B, 3512B and 3516B Generator Set Engines Housing (Front) - Remove
C11 and C13 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Turbocharger - Install
C11 and C13 Engines for Caterpillar Built Machines Turbocharger - Remove
345C Excavator Leaving the Machine
Replacing the MIDS Display with an Advisor M2 Display{7490} Replacing the MIDS Display with an Advisor M2 Display{7490}
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
3500 Engines Coolant Level Sensor - Remove and Install
325D and 329D Excavators Machine Security System - If Equipped
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Assemble
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Install
2005/01/31 Different Wire Removal Tool and Different Wire Installation Tool Are Required for 85 Pin Connectors on Engine Wiring Harnesses {0709}
C11 and C13 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Flywheel - Remove
C11 and C13 Engines for Caterpillar Built Machines Flywheel - Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Troubleshooting Faults With Service Codes
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove