Water Temperature Regulator - Remove and Install
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
Show/hide table
| PERHATIAN |
|---|
|
Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan. |
- Kuras sistem cairan pendingin. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas Pengisian Ulang dan Rekomendasi".
Show/hide table
Ilustrasi 1 g01132195 - Putuskan rakitan selang (1).
- Lepaskan baut (2).
- Lepaskan rumah (3).
- Lepaskan regulator temperatur air.
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Pasang regulator temperatur air.
- Pasang rumah (3).
- Pasang baut (2).
- Sambungkan rakitan selang (1).
- Isi sistem cairan pendingin. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas Pengisian Ulang dan Rekomendasi".
Show/hide table
| |
| Ilustrasi 2 | g01132195 |
Caterpillar Information System:
2005/01/31 Different Wire Removal Tool and Different Wire Installation Tool Are Required for 85 Pin Connectors on Engine Wiring Harnesses {0709}
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Assemble
325D and 329D Excavators Machine Security System - If Equipped
3500 Engines Coolant Level Sensor - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Remove
2004/12/01 A New PEEC Transducer Module is now Used {1917}
3508B, 3512B and 3516B Generator Set Engines Housing (Front) - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C11 and C13 Engines for Caterpillar Built Machines Flywheel - Remove
C11 and C13 Engines for Caterpillar Built Machines Flywheel - Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Troubleshooting Faults With Service Codes
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
C11 and C13 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
345C Excavator Hydraulic System Main Hydraulic Pump Air - Purge
2005/03/07 Wireless Communication Adapter Allows Radio Frequency Communication Between Computer and Electronic Control Module {0785, 0788}
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Control Module
C32 Marine Engines Coolant Level Sensor Circuit - Test
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Control Panel (Air Conditioner and Heater)
390F MHPU Mobile Hydraulic Power Unit Fuel System Water Separator - Drain