V-Belts - Inspect/Adjust/Replace
Alternator Belt
- Open the engine access door on the left side of the machine.
Show/hide table
Illustration 1 | g00627656 |
- Inspect the condition of the alternator belts and the adjustment of the alternator belts. The alternator belts should deflect 14 to 20 mm (0.55 to 0.79 inch) under 110 N (25 lb) of force.
Show/hide table
Illustration 2 | g00627658 |
- Loosen mounting bolt (1). Loosen adjusting locknut (2) .
Show/hide table
Illustration 3 | g00627659 |
- Move the alternator until the correct tension is reached.
- Tighten adjusting locknut (2). Tighten the mounting bolt (1) .
- Recheck the belt deflection. If the amount of deflection is incorrect, repeat Step 3 to Step 5.
- Close the engine access door.
Air Conditioner Belt (If Equipped)
- Stop the engine in order to inspect the air conditioner belt.
- Inspect the condition of the air conditioner belt and the adjustment of the air conditioner belt. The air conditioner belt should deflect 14 to 20 mm (0.55 to 0.79 inch) under 110 N (25 lb) of force.
Show/hide table
Illustration 4 | g00627660 |
- Loosen compressor bracket mounting bolt (1). Loosen adjusting locknut (2) .
Show/hide table
Illustration 5 | g00627661 |
- Move the compressor until the correct belt tension is reached.
- Move the compressor until the correct belt tension is reached. Tighten adjusting locknut (2). Tighten the compressor bracket mounting bolt (1) .
- Recheck the belt deflection. If the amount of deflection is incorrect, repeat Step 3 to Step 5.
- Start the engine. If poor cooling is still experienced, turn off the air conditioner. Stop the engine. Notify your Caterpillar dealer for air conditioner system service, if necessary.
Caterpillar Information System:
924Gz Wheel Loader Transmission Oil Sample - Obtain
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Remove
545 Wheel Skidder Engine Supplement Engine - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Shutoff Solenoid
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Install
924Gz Wheel Loader Transmission Oil Level - Check
545 Wheel Skidder Machine Systems Grapple Arch (Dual Function) - Remove and Install
515 and 525 Wheel SkiddersMachine Systems Control Valve (Winch) - Disassemble - C-500 Series Winch
3056 Engine for Caterpillar Built Machines Engine Design
924Gz Wheel Loader Transmission Oil Filter - Replace
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Selector and Pressure Control Valve (Transmission)
613C Series II Wheel Tractor-Scraper Air System and Brakes Air Compressor
D7R Series II Track-Type Tractor Fuel System - Prime
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel Conservation Practices
545 Wheel Skidder Machine Systems Pilot Valve (Grapple) - Disassemble
D7R Series II Track-Type Tractor Hydraulic System Oil Level - Check
545 Wheel Skidder Machine Systems Pilot Valve (Grapple) - Assemble
924G Wheel Loader Walk-Around Inspection
613C Series II Wheel Tractor-Scraper Air System and Brakes Service Brake
924Gz Wheel Loader Walk-Around Inspection
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking Brake Actuator
515 and 525 Wheel SkiddersMachine Systems Control Valve (Winch) - Assemble - C-500 Series Winch
924Gz Wheel Loader Window Washer Reservoir - Fill
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking Brake