924Gz Wheel Loader Caterpillar


Walk-Around Inspection

Usage:

924G 3DZ
Note: Inspect the machine for leaks. If leaks are observed, find the source of the leak and correct the leak. If leaks are suspected, check the fluid levels more frequently than the recommended intervals. If leaks are observed, check the fluid levels more frequently than the recommended intervals.


Illustration 1g00627858

Inspect the precleaner bowl (3) ( if equipped) for dirt buildup. Remove the dirt from the precleaner bowl when the dirt has accumulated close to the "FULL" line on the precleaner bowl.

Inspect the bucket (7) for damage and for excessive wear. Inspect the linkage (6) for damage and for excessive wear. Tighten any loose retaining bolts for the linkage pins. Repair the bucket or the linkage, if necessary.

Inspect the lights (5) for broken bulbs and for broken lenses. Replace the bulbs or lenses, if necessary.

Inspect the engine compartment (2) for trash buildup. Remove any trash buildup that is in the engine compartment. Clean the screens on the engine access doors.

Inspect the cooling system for leaks, for faulty hoses, and for trash buildup. Correct any leaks and remove any trash from the radiator (1) .

Inspect the belts for the engine attachments (11) for worn belts, for cracked edges or for frayed edges. Replace any damaged belts.

Inspect the hydraulic system for leaks. Inspect the hydraulic tank (10), cylinder rod seals, hoses and tubes. Also inspect plugs, couplings and fittings. Correct any leaks.

Inspect the axles (9) for leaks. Inspect the front differential for leaks and the rear differential for leaks.

Inspect the tires (8) for damage and for proper inflation. Replace any missing valve caps.

Inspect the transmission for leaks.

Make sure that the access covers and the guards are secured. Inspect the access covers for damage and the guards for damage.

Inspect the steps, walkways and handholds (4). These objects must be clean. Also, these objects must be in good condition. Inspect the Rollover Protective Structure (ROPS) for damage. Notify your Caterpillar dealer for repairs, if necessary. Tighten any loose bolts on the ROPS.

Inspect the tail lights 12 that are mounted in the fan guard for broken bulbs and for broken lenses. Replace the bulbs or lenses, if necessary.

Inspect the operator's compartment for cleanliness. Keep the operator's compartment clean.

Adjust the rearview mirrors for best visibility.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.