Work Tool Positioner
Show/hide table
 |
Use caution to avoid possible personal injury when adjusting the bucket positioner. Stop the engine and lower all equipment to relieve the hydraulic pressure. Engage the parking brake and block the tires to prevent sudden movement of the machine. Keep unauthorized personnel off the machine. |
 |
- Start the engine. Lower the bucket to the ground.
- Position the bucket at the desired angle to the ground. Turn the engine start switch key to the OFF position and remove the engine start switch key. Move the bucket tilt lever to the TILT BACK detent position.
- Loosen the two bolts that clamp the switch (1) to the tube. Move the switch until the orange light (2) comes on. Move the switch down the cylinder in order to increase the digging angle. Move the switch up the cylinder in order to decrease the digging angle.
Note: Do not adjust the work tool postioner by adjusting the tube assembly.
Show/hide table
 | |
| Illustration 1 | g00612503 |
- To test the adjustment, start the engine. Raise the bucket. Move the bucket tilt lever to the TILT BACK detent position.
- When the bucket reaches the preset digging angle, the bucket tilt lever should return to the HOLD position.
Caterpillar Information System:
924Gz Wheel Loader Work Tool Lockout Control
924G Wheel Loader Work Tool Positioner
924G Wheel Loader Work Tool Lockout Control
924Gz Wheel Loader Windows - Clean
924G Wheel Loader Windows - Clean
924Gz Wheel Loader Window Wiper and Washer Control
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking Brake
924Gz Wheel Loader Window Washer Reservoir - Fill
515 and 525 Wheel SkiddersMachine Systems Control Valve (Winch) - Assemble - C-500 Series Winch
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking Brake Actuator
924Gz Wheel Loader Walk-Around Inspection
613C Series II Wheel Tractor-Scraper Air System and Brakes Service Brake
924G Wheel Loader Maintenance Interval Schedule
994D Wheel Loader Engine Supplement Battery - Remove and Install
3500B Engines Water Temperature Regulators - Remove
Installation Instructions for Mounting 154-5634 Fuel Tank (Auxiliary) {1273} Installation Instructions for Mounting 154-5634 Fuel Tank (Auxiliary) {1273}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559} Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
613C Series II Wheel Tractor-Scraper Air System and Brakes General Information
545 Wheel Skidder Power Train Differential and Bevel Gear - Assemble
924Gz Wheel Loader Air Conditioner - Test
924Gz Wheel Loader Articulation Bearings - Lubricate
3500B Engines Water Temperature Regulators - Install