3500B Engines Caterpillar


Water Temperature Regulators - Install

Usage:

3516B 1NW

安装步骤

表 1
需要的工具 
工具  零件号  零件描述  数量 
138-7573  连杆支架 
221-8647  密封件安装工具总成 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g00911612

  1. 使用工具 (B)安装密封件。


    图 2g00602328

  2. 确保密封件的唇形部位朝向壳体内部。


    注意

    水温调节器 如果安装不正确,则会造成发动机过热。




    图 3g00602198

  3. 安装水温调节器 (5)。 安装密封垫 (6)。


    图 4g00602197

  4. 使用工具 (A)和适当起吊设备将水温调节器壳体 (4)安装到发动机上。 安装螺栓 (3).


    图 5g00602196

  5. 将管组件 (2)连接到水温调节器壳体。


    图 6g00602193

  6. 将管组件连接到 (1)水温调节器壳体。

  7. 加注冷却液到正确的液位。 参考操作和保养手册, "冷却系统冷却液 – 更换"。

Caterpillar Information System:

924Gz Wheel Loader Articulation Bearings - Lubricate
924Gz Wheel Loader Air Conditioner - Test
545 Wheel Skidder Power Train Differential and Bevel Gear - Assemble
613C Series II Wheel Tractor-Scraper Air System and Brakes General Information
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559} Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
Installation Instructions for Mounting 154-5634 Fuel Tank (Auxiliary) {1273} Installation Instructions for Mounting 154-5634 Fuel Tank (Auxiliary) {1273}
3500B Engines Water Temperature Regulators - Remove
994D Wheel Loader Engine Supplement Battery - Remove and Install
924G Wheel Loader Maintenance Interval Schedule
924Gz Wheel Loader Work Tool Positioner
924Gz Wheel Loader Axle Oscillation Bearings - Lubricate
D9R Track-Type Tractor Indicators and Gauges - Test
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Transmission Hydraulic System
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Visual Inspection
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
613C Series II Wheel Tractor-Scraper Air System and Brakes Quick-Release and Holding Valve
3500B Engines Water Pump - Remove
924Gz Wheel Loader Battery or Battery Cable - Replace
545 Wheel Skidder Machine Systems Piston Pump (Implement, Pilot, Steering, Brake) - Disassemble
613C Series II Wheel Tractor-Scraper Engine Crankcase Breather - Clean
D7R Track-Type Tractor Transmission Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.