Battery or Battery Cable - Replace
- Open the engine access door on the right side of the machine.
Show/hide table
Illustration 1 | g00616314 |
- Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key.
Show/hide table
Illustration 2 | g00614315 |
- Remove the access panel for the battery on the right side and on the left side of the machine.
Show/hide table
Illustration 3 | g00614313 |
- At the battery disconnect switch, disconnect the negative battery cable that is connected to the frame.
Show/hide table
NOTICE |
---|
Do not allow the disconnected battery cable to contact the disconnect switch. |
- Disconnect the negative battery cable at the battery.
Show/hide table
Illustration 4 | g00614317 |
- Perform the necessary repairs. Replace the cable or the battery, as needed.
- Connect the negative battery cable at the battery. Replace the battery cover.
- Connect the battery cable at the battery disconnect switch, if equipped. If the machine is not equipped with a battery disconnect switch, connect the negative cable to the frame.
- Install the battery disconnect switch key. Turn the battery disconnect switch to the ON position.
Caterpillar Information System:
3500B Engines Water Pump - Remove
613C Series II Wheel Tractor-Scraper Air System and Brakes Quick-Release and Holding Valve
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Visual Inspection
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Transmission Hydraulic System
D9R Track-Type Tractor Indicators and Gauges - Test
924Gz Wheel Loader Axle Oscillation Bearings - Lubricate
3500B Engines Water Temperature Regulators - Install
924Gz Wheel Loader Articulation Bearings - Lubricate
924Gz Wheel Loader Air Conditioner - Test
545 Wheel Skidder Power Train Differential and Bevel Gear - Assemble
545 Wheel Skidder Machine Systems Piston Pump (Implement, Pilot, Steering, Brake) - Disassemble
613C Series II Wheel Tractor-Scraper Engine Crankcase Breather - Clean
D7R Track-Type Tractor Transmission Oil Level - Check
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Selector Valve (Torque Converter Lockup Clutch) - Adjust
613C Series II Wheel Tractor-Scraper Engine Oil Level - Check
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
613C Series II Wheel Tractor-Scraper Engine Oil and Filter - Change
613C Series II Wheel Tractor-Scraper Air System and Brakes Brake System
3500B Engines Water Pump (Separate Circuit Aftercooler) - Remove
924Gz Wheel Loader Bucket Lower Pivot Bearings - Lubricate
3500B Engines Water Pump (Separate Circuit Aftercooler) - Install