Crankshaft Rear Seal - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7600 | Slide Hammer Puller Gp | 1 |
Start By:
- Remove the flywheel.
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drill three evenly spaced 3 mm (.12 inch) holes in crankshaft rear seal (1) .
Show/hide table
 | |
| Illustration 1 | g00527955 |
- Use Tool (A) in order to remove the crankshaft rear seal.
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
D9R Track-Type Tractor Caterpillar Monitoring System
D9R Track-Type Tractor Ether Starting Aid
994D Air System Wheel Loader Air Dryer
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Hydraulic Electronic Control (Joystick)
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
3046 Engine For Caterpillar Built Machines Flywheel - Install
980G Wheel Loader Machine Systems Heater Coil - Remove and Install
631E Series II and 637E Series II Wheel Tractor-Scrapers Auger Hydraulic System Auger Drive - Test and Adjust
623F Wheel Tractor-Scraper Machine Systems Steering Cylinder - Install
623F Wheel Tractor-Scraper Machine Systems Steering Cylinder - Remove
D8R Track-Type Tractor Engine Supplement Engine Oil Filter and Base - Remove and Install
994D Air System Wheel Loader General Information
D9R Track-Type Tractor Gauges
515 Wheel Skidder and 525 Wheel Skidder Cooling System Level - Check
994D Air System Wheel Loader Air Horn
D9R Track-Type Tractor Digital Display Window
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant (DEAC) - Change
980G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Disassemble
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant (ELC) - Change
545 Wheel Skidder Hydraulic and Steering System Articulated Hitch
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant Additive (DEAC) - Add
D9R Track-Type Tractor Tachometer
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Install