Engine Air Cleaner Element (Single Element) - Inspect/Replace
请参阅操作和保养手册, "发动机空气滤清器保养指示器 - 检查"。
Show/hide table
| 注意 |
|---|
|
未安装空气滤清器滤芯切勿运转发动机。 空气滤清器滤芯损坏时也决不能运转发动机。 不要使用褶纸、垫圈或密封件损坏的滤芯。 污物进入发动机会造成发动机零部件的早期磨损和损坏。 空气滤清器滤芯有助于防止空气中的碎屑进入进气口。 |
Show/hide table
| 注意 |
|---|
|
在发动机运转时切勿保养空气滤清器滤芯，因为这样会使污物进入发动机。 |
有多种空气滤清器可以与本发动机一起使用。 请向 OEM 咨询有关更换空气滤清器的正确步骤。
Caterpillar Information System:
C15 Petroleum Generator Set Engines Fuel Transfer Pump
XQ125 Generator Set Driven Equipment - Check
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
G3500 Engines Cooling System Coolant (NGEC) - Change
3500 Industrial Engines Auxiliary Water Pump
C7 Marine Engines Engine Sensors - Remove and Install
C7 Marine Engines Fuel Cooler - Remove and Install
C4.4 (Mech) Industrial Engine Battery or Battery Cable - Disconnect
C4.4 (Mech) Industrial Engine Battery - Replace
3126E Truck Engines Reference Material
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
G3406 Engines Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
C18 Generator set and C18 Marine Engines Flywheel - Remove
C18 Generator set and C18 Marine Engines Flywheel - Install
G3500 Engines Starting the Engine
C15 and C18 Industrial Engines Camshaft - Install
C15 and C18 Industrial Engines Camshaft - Remove
C13, C15, and C18 Generator Set Engines Speed Control (Switch) - Test
G3500 Generator Sets Cooling System Coolant (NGEC) - Change
C15 and C18 Industrial Engines Alternator - Remove and Install
3500 and 3500B Engines Electrical System
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankcase Pressure Sensor
3500B and 3500C Marine Engines Turbocharger Inlet Pressure Sensor