Stabilizer Link - 119-4272
Show/hide table
 | |
| Illustration 1 | g00352717 |
(1) Use shims to get a clearance between the machine and the bulldozer trunnions in order to prevent binding. Use the procedure in Special Instructions, REHS0107.
Caterpillar Information System:
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 06 Solenoid Valve (Ride Control) Current Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 05 Solenoid Valve (Ride Control) Current Below Normal - Test
D11R Track-Type Tractor Engine Supplement Fuel Filter Base and Priming Pump - Remove
D11R Track-Type Tractor Hydraulic System Bulldozer Dual Tilt Cylinder
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 03 Solenoid Valve (Ride Control) Voltage Above Normal - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate - Remove
854G Wheel Dozer Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
854G Wheel Dozer Machine Systems Evaporator Coil and Heater Coil - Remove
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Steering Shaft (Command Control Steering) - Lubricate
994D Wheel Loader Steering System Bypass Switch (Steering Return Screen)
3306C Engines for Caterpillar Built Machines Cylinder Liner
D11R Track-Type Tractor Hydraulic System Bulldozer Lift Cylinder
994D Wheel Loader Steering System Limit Switch (STIC Control Lock)
994D Wheel Loader Steering System Steering Control Support
D11R Track-Type Tractor Hydraulic System Bulldozer Trunnion
D11R Track-Type Tractor Power Train Torque Converter
D11R Track-Type Tractor Engine Supplement Fuel Filter Base and Priming Pump - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Steering Frame Lock - Separate and Connect
854G Wheel Dozer Machine Systems Evaporator Coil and Heater Coil - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Drive Shaft (Front) and Drive Shaft Carrier Bearing - Remove
D11R Track-Type Tractor Engine Supplement Engine Electronic Control Module - Remove and Install
D11R Track-Type Tractor Engine Supplement Engine Oil Filter Base and Bypass Valve - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate - Install
D11R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler Bypass Valve - Remove and Install