Main Control Valve and Mounting Plate - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-7630     | Stand     | 2     |
8S-7631 | Tube     | 2     | |
8S-7615 | Pin     | 2     | |
8S-8048 | Saddle     | 2     | |
B     | 8S-9906     | Ratchet Puller     | 1     |
C     | 8S-9906     | Ratchet Puller     | 1     |
Note: The main control valve and mounting that is used in machines with Pilot Hydraulic systems and machines with Electro-Hydraulic controls are similar. Therefore, both assemblies can be installed in the same manner.
- Install Tooling (B) and Tooling (C) on the main control valve, as shown. The combined weight of the main control valve and of mounting plate (15) is approximately 170 kg (375 lb).
Note: Use Tooling (B) in order to control the rearward movement.
Note: Use Tooling (C) in order to control the upward movement.
Show/hide table
Illustration 1 | g00352846 |
- Install the plate assembly so that the mounting plate rests on the front loader frame, as shown.
Show/hide table
Illustration 2 | g00352845 |
- Reposition Tooling (C) in order to support the rear of the mounting plate, as shown.
Show/hide table
Illustration 3 | g00352844 |
- Use Tooling (B) and Tooling (C) to install the main control valve and mounting plate (15) in the original position.
Show/hide table
Illustration 4 | g00352843 |
- Install mounting bolts (14) .
Show/hide table
Illustration 5 | g00352842 |
Rear mounting bolts |
- Install the wiring clip and bolt (13) .
Show/hide table
Illustration 6 | g00352841 |
- Connect electrical connectors (12) .
- Connect pilot hose assemblies (11) to the pilot valve.
Show/hide table
Illustration 7 | g00352839 |
- Connect hydraulic hose assembly (10), pilot hose assembly (8), and pilot hose assemblies (9) .
Show/hide table
Illustration 8 | g00352837 |
Rear View |
- Connect hose assemblies (7) to the main control valve assembly.
Show/hide table
Illustration 9 | g00352836 |
- Connect hydraulic hose assemblies (5) to the diverter valve.
Show/hide table
Illustration 10 | g00352835 |
- Install hydraulic hose assemblies (6) .
- Install hydraulic tube assemblies (4) .
Show/hide table
Illustration 11 | g00352834 |
- Install hydraulic hose assemblies (3) .
Show/hide table
Illustration 12 | g00352832 |
- Install front guard (2) and nuts (1) .
Show/hide table
Illustration 13 | g00350674 |
- Use the hydraulics to raise the loader arms. Remove Tooling (A) .
Show/hide table
Illustration 14 | g00350673 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
D11R Track-Type Tractor Engine Supplement Engine Oil Filter Base and Bypass Valve - Remove and Install
D11R Track-Type Tractor Engine Supplement Engine Electronic Control Module - Remove and Install
854G Wheel Tractor and 992G Wheel Loader Power Train Drive Shaft (Front) and Drive Shaft Carrier Bearing - Remove
854G Wheel Dozer Machine Systems Evaporator Coil and Heater Coil - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Steering Frame Lock - Separate and Connect
D11R Track-Type Tractor Engine Supplement Fuel Filter Base and Priming Pump - Install
D11R Track-Type Tractor Power Train Torque Converter
D11R Track-Type Tractor Hydraulic System Bulldozer Trunnion
994D Wheel Loader Steering System Steering Control Support
994D Wheel Loader Steering System Limit Switch (STIC Control Lock)
D11R Track-Type Tractor Hydraulic System Stabilizer Link - 119-4272
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 06 Solenoid Valve (Ride Control) Current Above Normal - Test
D11R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler Bypass Valve - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train CID 0368 FMI 04 Rotary Switch (Transmission Auto/Man) Voltage Below Normal - Test - Conventional Steering-Without Integrated Braking System
844 Wheel Tractor Hydraulic System Ground Engaging Tool Torques
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Flow Switch
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pump Control Valve (Steering) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Install
966G Wheel Loader and 972G Wheel Loader Power Train CID 0622 FMI 03 Push Button Switch (Upshift) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 03 Rocker Switch (Transmission Direction) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 04 Rocker Switch (Transmission Direction) Voltage Below Normal - Test