994D Wheel Loader Steering System Caterpillar


Bypass Switch (Steering Return Screen)

Usage:

994D 3TZ



Illustration 1g00293876

(1) Torque for two nuts at assembly ... 3.7 ± 0.3 N·m (32.75 ± 2.65 lb in)

(2) 9X-8071 Spring

Length under test force ... 22.86 mm (.900 inch)
Test force ... 4.45 ± 0.50 N (1.000 ± .110 lb)
Free length after test ... 35.6 mm (1.40 inch)
Outside diameter ... 17.03 mm (.671 inch)

(3) At assembly, protect the O-ring seals from contact with the threads. Prior to assembly, lubricate the O-ring seal with the fluid that is being sealed.

Caterpillar Information System:

3306C Engines for Caterpillar Built Machines Cylinder Liner
D11R Track-Type Tractor Hydraulic System Bulldozer Lift Cylinder
D11R Track-Type Tractor Engine Supplement Water Pump - Assemble
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Steering Pilot Oil Screen (Command Control Steering) - Clean/Replace
D11R Track-Type Tractor Hydraulic System Ripper Control Linkage
D11R Track-Type Tractor Engine Supplement Water Pump - Disassemble
631E Series II Wheel Tractor-Scrapers Blocking the Bowl and Apron
854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Oil Pump - Remove
D11R Track-Type Tractor Engine Supplement Water Pump - Install
D11R Track-Type Tractor Hydraulic System Bulldozer Lift and Tilt Control Linkage
994D Wheel Loader Steering System Pressure and Flow Compensator Valve (Steering)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Steering Shaft (Command Control Steering) - Lubricate
854G Wheel Dozer Machine Systems Evaporator Coil and Heater Coil - Remove
854G Wheel Dozer Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate - Remove
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 03 Solenoid Valve (Ride Control) Voltage Above Normal - Test
D11R Track-Type Tractor Hydraulic System Bulldozer Dual Tilt Cylinder
D11R Track-Type Tractor Engine Supplement Fuel Filter Base and Priming Pump - Remove
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 05 Solenoid Valve (Ride Control) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0363 FMI 06 Solenoid Valve (Ride Control) Current Above Normal - Test
D11R Track-Type Tractor Hydraulic System Stabilizer Link - 119-4272
994D Wheel Loader Steering System Limit Switch (STIC Control Lock)
994D Wheel Loader Steering System Steering Control Support
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.