Pin Puller Cylinder
Show/hide table
图 1 | g02709436 |
Show/hide table
6E-3113 裂土器拔销油缸总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 173-9779 螺栓     | 装配之前,润滑螺纹。     |
拧紧至扭矩为 900 ± 100 N·m (664 ± 74 lb ft)。 |
|||
A     | 1     | 6E-3976 油缸组件     | 孔径为 101.60 ± 0.08 mm (4.000 ± 0.003 in)。     |
B     | 1     | 6E-3976 连杆组件     | 直径为 44.400 ± 0.038 mm (1.7480 ± 0.0015 in)。     |
C     | 1     | 6E-4976 缸盖     | 四道棱上的缸盖孔径为 44.78 ± 0.03 mm (1.763 ± 0.001 in)。     |
2     | 1     | 6E-4976 缸盖     | 装配之前,用清洁的润滑脂润滑螺纹。     |
拧紧至扭矩为 600 ± 130 N·m (443 ± 96 lb ft)。 |
|||
3     | 1     | 4T-6907 承磨环     | 装配之前的内径为 44.45 mm (1.750 in)。     |
厚度为 1.50 ± 0.03 mm (0.059 ± 0.001 in)。 |
|||
4     | 1     | 167-2190 缓冲密封件组件     | 用所密封的润滑剂稍加润滑。     |
(5)     | 1     | 167-2300 U 形杯密封件     | 用所密封的润滑剂稍加润滑。     |
6     | 1     | 231-3539 刮尘密封件     | 用所密封的润滑剂稍加润滑。     |
7     | -     | -     | 装配之前,在刮尘密封凹槽上涂抹绿色 Loctite 609。     |
Caterpillar Information System:
D11R Track-Type Tractor Hydraulic System Ripper Tip Cylinder
627F Wheel Tractor-Scraper Stopping the Engine
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Assemble
Installation of D5M Sweep Group{7325} Installation of D5M Sweep Group{7325}
D11R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
854G Wheel Dozer Steering Cylinder Bearings - Lubricate
611 Wheel Tractor-Scraper 3306B Engine Supplement Engine Front Support - Remove
D11R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Drive Shaft
611 Wheel Tractor-Scraper 3306B Engine Supplement Engine Front Support - Install
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Disassemble
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Transmission Oil Cooler - Remove
854G Wheel Dozer Machine Systems Relief Valve (Steering Pilot) - Remove and Install
D11R Track-Type Tractor Hydraulic System Quick Dump Valve
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Pressure Control Override)
992G Wheel Loader Transmission Oil - Change
631E Series II Wheel Tractor-Scrapers Welding on Machines and Engines with Electronic Controls
854G Wheel Dozer Transmission Oil Filter - Replace
992G Wheel Loader Transmission Oil Level - Check
854G Wheel Dozer Machine Systems Gear Pump (Pilot) - Disassemble
854G Wheel Dozer Hydraulic System Main Control Valve
854G Wheel Dozer Machine Systems Gear Pump (Pilot) - Assemble