Gear Pump (Pilot) - Disassemble
Start By:
- Remove the pilot pump. Refer to Disassembly and Assembly, "Gear Pump (Implement Pilot) - Remove".
- Mark top cover (1), body (2) and bottom cover (3) for assembly purposes.
Show/hide table
Illustration 2 g00348774 - Remove four bolts (4). Remove top cover (1) from body (2).
Show/hide table
Illustration 3 g00348775 - Remove O-ring seal (5), seal (6) and backup seal (7).
Show/hide table
Illustration 4 g00348776 Note: Note the location of recess (8) in top bushing (9). The recess points toward the suction side of body (2). This is the large opening in the pump body.
- Remove top bushing (9).
Show/hide table
Illustration 5 g00348777 Show/hide tableIllustration 6 g00348779 - Remove two gears (10) and (11).
Show/hide table
Illustration 7 g00348781 - Remove pump body (2) from bottom cover (3).
Show/hide table
Illustration 8 g00348782 - Remove O-ring seal (12), seal (13) and backup seal (14).
Note: Note the location of recess (15) in bottom bushing (16). The recess points toward the suction side of body (2). This is the large opening in the pump body.
- Remove bottom bushing (16).
Show/hide table
Illustration 9 g00348783 - Remove snap ring (17) and lip seal (18) from bottom cover (3).
Show/hide table
Illustration 1 | g00348773 |
Caterpillar Information System:
992G Wheel Loader Transmission Oil Level - Check
854G Wheel Dozer Transmission Oil Filter - Replace
631E Series II Wheel Tractor-Scrapers Welding on Machines and Engines with Electronic Controls
992G Wheel Loader Transmission Oil - Change
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Pressure Control Override)
D11R Track-Type Tractor Hydraulic System Quick Dump Valve
854G Wheel Dozer Machine Systems Relief Valve (Steering Pilot) - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Transmission Oil Cooler - Remove
966G Wheel Loader and 972G Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
D10R Track-Type Tractor Hydraulic System Pin Puller Cylinder
D11R Track-Type Tractor Hydraulic System Ripper Tip Cylinder
627F Wheel Tractor-Scraper Stopping the Engine
854G Wheel Dozer Hydraulic System Main Control Valve
854G Wheel Dozer Machine Systems Gear Pump (Pilot) - Assemble
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Overspeed) - 147-1223 Pilot to RV Port
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Fan Drive)
D11R Track-Type Tractor Hydraulic System Logic Valve
854G Wheel Dozer Machine Systems Gear Pump (Steering Pilot) - Remove
854G Wheel Dozer Machine Systems Gear Pump (Steering Pilot) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Expansion Valve System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
994D Wheel Loader Steering System General Information
611 Wheel Tractor-Scraper 3306B Engine Supplement Exhaust Extension - Remove and Install
D3C Series III, D4C Series III and D5C Series III Hystat Track-Type Tractors Power Train Machine Preparation for Troubleshooting