Transmission Oil Level - Check
Show/hide table
图 1 | g00631772 |
变速箱油位观测计和变速箱油的加注口盖位于机器的左侧。
- 运转机器几分钟,使液压油温度升高。将机器停放在水平地面上。
- 检查油位表中的油位。发动机运转过程中,使油位保持在工作范围内。
注: 发动机停止时,油位明显变化。 油位将明显比工作范围高。发动机起动前,油位应在仪表中上方。
Show/hide table
图 2 | g00936406 |
- 如有必要,卸下加注口盖,添加机油。清洁并安装加注口盖。
Caterpillar Information System:
854G Wheel Dozer Transmission Oil Filter - Replace
631E Series II Wheel Tractor-Scrapers Welding on Machines and Engines with Electronic Controls
992G Wheel Loader Transmission Oil - Change
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Pressure Control Override)
D11R Track-Type Tractor Hydraulic System Quick Dump Valve
854G Wheel Dozer Machine Systems Relief Valve (Steering Pilot) - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Transmission Oil Cooler - Remove
966G Wheel Loader and 972G Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
D10R Track-Type Tractor Hydraulic System Pin Puller Cylinder
D11R Track-Type Tractor Hydraulic System Ripper Tip Cylinder
627F Wheel Tractor-Scraper Stopping the Engine
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Assemble
854G Wheel Dozer Machine Systems Gear Pump (Pilot) - Disassemble
854G Wheel Dozer Hydraulic System Main Control Valve
854G Wheel Dozer Machine Systems Gear Pump (Pilot) - Assemble
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Overspeed) - 147-1223 Pilot to RV Port
D11R Track-Type Tractor Hydraulic System Solenoid Valve (Fan Drive)
D11R Track-Type Tractor Hydraulic System Logic Valve
854G Wheel Dozer Machine Systems Gear Pump (Steering Pilot) - Remove
854G Wheel Dozer Machine Systems Gear Pump (Steering Pilot) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Expansion Valve System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
994D Wheel Loader Steering System General Information
611 Wheel Tractor-Scraper 3306B Engine Supplement Exhaust Extension - Remove and Install