Engine Front Support - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-1321 | Support Beam | 1 |
| 4F-0411 | Bolt | 4 | |
| 8S-7650 | Cylinder Assembly | 1 | |
| 8S-7630 | Stand | 1 | |
| 8S-7615 | Pin | 2 | |
| 6V-9061 | Pump | 1 | |
- Use two people or use nylon lifting straps and a hoist in order to install engine front support (5) on the trunnion. The weight of front support (5) is 26 kg (57 lb). Install ten bolts (4) that secure front support (5) to the trunnion.
Show/hide table
 | |
| Illustration 1 | g00346377 |
Show/hide table
 | |
| Illustration 2 | g00346378 |
- Use Tooling (A) in order to lower the engine on the front engine support.
Show/hide table
 | |
| Illustration 3 | g00346376 |
- Install two bolts (3) that secure the engine front support to the machine frame.
Show/hide table
 | |
| Illustration 4 | g00346374 |
Show/hide table
 | |
| Illustration 5 | g00346375 |
- Install swivel (2) in position and install two clamps (1). Apply 5P-3931 Anti-Seize Compound on the threads of the bolts of clamps (1). Tighten the bolts to a torque of 20 ± 7 N·m (15 ± 5 lb ft).
Show/hide table
 | |
| Illustration 6 | g00346372 |
End By: Install the radiator. Refer to Disassembly and Assembly, "Radiator Install". The information is in this manual.
Caterpillar Information System:
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Disassemble
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Install
D11R Track-Type Tractor Hydraulic System Bulldozer Lift Cylinder
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Aftercooler - Remove and Install
D11R Track-Type Tractor Hydraulic System Cooler Bypass Valve
854G Wheel Dozer Machine Systems Piston Pump (Steering) - Install
854G Wheel Dozer Machine Systems Piston Pump (Steering) - Remove
D3C Series III, D4C Series III and D5C Series III Hystat Track-Type Tractors Power Train Motor Tracking and Fast Mode - Test
854G Wheel Dozer Hydraulic Fan Valve Screen - Replace
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Limited Slip Differential Disc End Play Check - Check
D6R Track-Type Tractor Cooling System Coolant (DEAC) - Change
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Drive Shaft
D11R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
611 Wheel Tractor-Scraper 3306B Engine Supplement Engine Front Support - Remove
854G Wheel Dozer Steering Cylinder Bearings - Lubricate
D11R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
Installation of D5M Sweep Group{7325} Installation of D5M Sweep Group{7325}
854G Wheel Dozer Machine Systems Gear Pump (Secondary Steering) - Assemble
627F Wheel Tractor-Scraper Stopping the Engine
D11R Track-Type Tractor Hydraulic System Ripper Tip Cylinder
D10R Track-Type Tractor Hydraulic System Pin Puller Cylinder
966G Wheel Loader and 972G Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Transmission Oil Cooler - Remove