 | |
| Illustration 1 | g00863361 |
(1) Torque for the eight bolts ... 71 ± 10 N·m (52 ± 7 lb ft)
(2) Torque for the 12 bolts ... 150 ± 15 N·m (111 ± 11 lb ft)
(3) Torque for the eight bolts ... 28 ± 7 N·m (20 ± 5 lb ft)
(4) Torque for the 12 bolts ... 58 ± 7 N·m (43 ± 5 lb ft)
(5) Lubricate the universal joint grease fittings with 1P-0808 Multipurpose Grease.
(6) Lubricate the spline when the machine is fully articulated. Lubricate the spline with 5P-0960 Molybdenum Grease.
 | |
| Illustration 2 | g00863362 |
(7) Apply 4C-5593 Anti-Seize Compound to the contact surface of the drive shaft prior to installing the drive shaft.
(8) Lubricate the pillow block with 1P-0808 Multipurpose Grease.
(9) Torque for the bolt ... 105 ± 20 N·m (77 ± 15 lb ft)
(10) Install the setscrew. Turn the setscrew inward to the bottom of the keyway. Turn the setscrew outward by one-half turn. Torque for the jam nut equals 24 ± 4 N·m (18 ± 3 lb ft).