Fuel Filter Base - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g01080654 - Disconnect hose assembly (3) from fuel filter base (4).
- Disconnect hose assembly (5).
- Disconnect tube assembly (6).
- Disconnect the harness assembly from fuel pressure sensor (3). Remove the fuel pressure sensor from the fuel filter base.
- Use Tooling (A) to remove fuel filter (7) from fuel filter base (4).
- Remove bolts (1) and remove the fuel filter base.
Caterpillar Information System:
C-10 and C-15 Petroleum Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C-10 and C-15 Petroleum Engines E445 High Auxiliary Temperature
C-10 and C-15 Petroleum Engines E443 High Auxiliary Pressure
C-10 and C-15 Petroleum Engines E056 High Fuel Temperature Warning
C-10 and C-15 Petroleum Engines E055 High Fuel Temperature Shutdown
C-10 and C-15 Petroleum Engines E054 High Fuel Temperature Derate
C15 On-highway Engines Engine Control Module - Remove and Install
3126B Petroleum Engine E040 Low Engine Oil Pressure Shutdown
3126B Petroleum Engine E039 Low Engine Oil Pressure Derate
3126B Petroleum Engine E027 High Inlet Air Temperature Warning
3126B Petroleum Engine E025 High Inlet Air Temperature Derate
C7 Marine Engines Electric Starting Motor - Remove and Install
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 On-highway Engines Fuel Filter Base - Install
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Petroleum Engine Air Shutoff System - Test
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068} Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
3126B Petroleum Engine Auxiliary Temperature Sensor Circuit - Test
3126B Industrial Engines Air Inlet Heater Circuit - Test
2004/06/28 A Corrosion Testing Cable Group Helps Determine if Engine Parts Are Subject to Corrosion {0779, 0781, 0785}
3126B Industrial Engines Analog Sensor Open or Short Circuit - Test
3126B Industrial Engines Analog Sensor Supply Circuit - Test
3126B Petroleum Engine CAN Data Link Circuit - Test
3126B Petroleum Engine Coolant Level Sensor Circuit - Test