Electronic Control Module - Remove and Install
Removal Procedure
Start By:
- Remove the fuel cooler. Refer to Disassembly and Assembly, "Fuel Cooler - Remove and Install".
- Loosen bolts (1) until the harness assemblies can be disconnected. Disconnect the harness assemblies from electronic control module (3) .
Show/hide table
Illustration 1 | g01081082 |
- Remove bolts (2) and electronic control module (3) .
Installation Procedure
- Position electronic control module (3) on the engine and install bolts (2) .
Show/hide table
Illustration 2 | g01081082 |
- Connect the harness assemblies to electronic control module (3). Tighten bolts (1) to a torque of 6 ± 1 N·m (53 ± 9 lb in).
End By: Install the fuel cooler. Refer to Disassembly and Assembly, "Fuel Cooler - Remove and Install".
Caterpillar Information System:
C7 Marine Engines Crankshaft Gear - Remove and Install
G3500B Engines Auxiliary Water Pump
G3500 A3 Engines Engine Shutdown
C-10 and C-15 Petroleum Engines Intermittent Engine Shutdown
2004/07/01 Internal Components for Remanufactured Injectors are Now Coated for Increased Service Life {1290}
3126B Petroleum Engine Exhaust Temperature Is Too High
C13, C15, and C18 Generator Set Engines Excessive Black Smoke
C27 and C32 Industrial and Petroleum Engines Engine Will Not Crank
3126B Petroleum Engine Engine Stalls at Low RPM
C-10 and C-15 Petroleum Engines Engine Misfires, Runs Rough or Is Unstable
C-10 and C-15 Petroleum Engines Engine Cranks but Will Not Start
3126B Petroleum Engine Electronic Service Tool Will Not Communicate with ECM
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modem
C7 Marine Engines Alternator - Remove and Install
C7 Marine Engines Electric Starting Motor - Remove and Install
3126B Petroleum Engine E025 High Inlet Air Temperature Derate
3126B Petroleum Engine E027 High Inlet Air Temperature Warning
3126B Petroleum Engine E039 Low Engine Oil Pressure Derate
3126B Petroleum Engine E040 Low Engine Oil Pressure Shutdown
C15 On-highway Engines Engine Control Module - Remove and Install
C-10 and C-15 Petroleum Engines E054 High Fuel Temperature Derate
C-10 and C-15 Petroleum Engines E055 High Fuel Temperature Shutdown
C-10 and C-15 Petroleum Engines E056 High Fuel Temperature Warning
C-10 and C-15 Petroleum Engines E443 High Auxiliary Pressure