Speed Sensor
Show/hide table
图 1 | g02612277 |
Show/hide table
191-8304 转速传感器 和 191-8305 转速传感器 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | -     | -     | 组装前,用密封的润滑剂稍加润滑 O 形密封圈。     |
拧紧扭矩至 28 ± 7 N·m (250 ± 62 lb in)。 |
|||
传感器的输出信号为模拟信号。     | |||
传感器和轮齿之间的最小间隙为 0.5 mm (0.02 in)。     |
Caterpillar Information System:
C7 Urban Transit Bus Engines Cooling System Coolant (DEAC) - Change
C27 and C32 Industrial and Petroleum Engines Electronic Unit Injector Wiring
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
2004/09/01 An Improved Auxiliary Water Pump is Introduced {1371}
3406E and 3456 Industrial Engines Air Shutoff Solenoid
C9.3 Engine for Caterpillar Built Machines Piston Cooling Jet
3406E and 3456 Generator Set Engines Poor Acceleration or Response
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
3406E Truck Engines Crankshaft Seals
3406E Truck Engines Crankshaft
C11 and C13 Engines for Caterpillar Built Machines Vibration Damper - Check
C9 Marine Engines and C9 Marine Generator Sets Flywheel Housing
C15 On-highway Engines Fuel Priming Pump - Remove and Install
G3516B Engines Location of Components
C15 On-highway Engines Fuel Transfer Pump - Remove
C15 On-highway Engines Fuel Transfer Pump - Install
C11 and C13 Petroleum Engines Lubrication System
G3516B Engines Generator Output Power Readings Do Not Match
C15 On-highway Engines Electronic Unit Injector - Remove
G3516B Engines Generator Output Power Sensor
C15 and C18 Generator Set Engines Electronic Unit Injector Sleeve - Remove
C15 and C18 Industrial Engines Electronic Unit Injector Sleeve - Install
C9 Marine Generator Set Engines Basic Engine
C15 and C18 Industrial Engines Water Lines