Fuel Transfer Pump - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seal (2) on fuel transfer pump (1). Lubricate the O-ring seal with clean engine oil.
- Position the fuel transfer pump on front housing (5). Install bolts (3).
- Connect tube assembly (4).
- Connect the fuel supply line to the fuel transfer pump.
- Turn the fuel supply valve to the “ON” position.
- Remove the air from the fuel system. Refer to Testing and Adjusting, "Fuel System - Prime".
Show/hide table
| |
| Illustration 1 | g01075935 |
Caterpillar Information System:
C15 On-highway Engines Fuel Transfer Pump - Remove
G3516B Engines Location of Components
C15 On-highway Engines Fuel Priming Pump - Remove and Install
G3600 Engines Speed Sensor
C7 Urban Transit Bus Engines Cooling System Coolant (DEAC) - Change
C27 and C32 Industrial and Petroleum Engines Electronic Unit Injector Wiring
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
2004/09/01 An Improved Auxiliary Water Pump is Introduced {1371}
3406E and 3456 Industrial Engines Air Shutoff Solenoid
C9.3 Engine for Caterpillar Built Machines Piston Cooling Jet
3406E and 3456 Generator Set Engines Poor Acceleration or Response
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
C11 and C13 Petroleum Engines Lubrication System
G3516B Engines Generator Output Power Readings Do Not Match
C15 On-highway Engines Electronic Unit Injector - Remove
G3516B Engines Generator Output Power Sensor
C15 and C18 Generator Set Engines Electronic Unit Injector Sleeve - Remove
C15 and C18 Industrial Engines Electronic Unit Injector Sleeve - Install
C9 Marine Generator Set Engines Basic Engine
C15 and C18 Industrial Engines Water Lines
G3516B Engines Generator Output Power Sensor - Calibrate
3406E and 3456 Generator Set Engines Crankshaft Rear Seal - Install
C9 Marine Generator Set Engines Finding Top Center Position for No. 1 Piston
C13, C15, and C18 Tier 4 Final Engines Piston and Rings