Service Tools
Tools
The service tools that are listed in table 1 can be used to aid with the troubleshooting and repair of the Product Link PL102C system. Refer to Special Instruction, REHS2143 for specific part numbers for the service tools.
Show/hide table
Tools List     |
Description     |
Laptop computer with Caterpillar Service Tool software for the Product Link PL102C     |
Serial Service Cable     |
Serial Extension Cable 10 ft.     |
USB to Serial Adapter     |
Digital Multimeter     |
Connector Repair Kit     |
Terminal Repair Kit     |
Crimp Tool     |
Socket Wrench Set (1/2 Inch Drive)     |
Socket Wrench Set (1/2 Inch Drive - Metric)     |
Hand Tool Group (Screwdrivers)     |
Torque Wrench (1/2 Inch Drive)     |
Wire (Option for alternator connections)     |
Wire Splice (Sealed)     |
Show/hide table
Illustration 1 | g01092359 |
Serial Service Cable |
Show/hide table
Illustration 2 | g01092365 |
Serial Extension Cable |
For instructions on servicing the Deutsch DT type of connectors, see Special Instruction, SEHS9615.
Use the multimeter for making continuity checks or for measuring voltage.
Note: Refer to Systems Operation Troubleshooting Testing and Adjusting, RENR8115, "SETUP" for software installation information and how to connect a computer in order to install software.
Caterpillar Information System:
C15 Petroleum Engines Engine Oil Pump - Install
C15 Petroleum Engines Engine Oil Pump - Remove
3126B Petroleum Engine Intermittent Engine Shutdown
3406E and 3456 Generator Set Engines Digital Sensor Supply Circuit - Test
G3520C and G3520E Generator Set Engines Generator Output Power Readings Do Not Match
2004/05/01 Procedure to Allow Clearance to Install an Eaton VCTplus Clutch {1156}
3406E and 3456 Generator Set Engines CAT Data Link Circuit - Test
3406E and 3456 Generator Set Engines Analog Sensor Supply Circuit - Test
C18 Generator Set Safety Messages
C-15 Petroleum Engine Vibration Damper - Check
3126B Marine Engines Analog Sensor Supply Circuit - Test
C15 and C18 Industrial Engines Flywheel Adapter - Remove and Install
3126B Petroleum Engine Intermittent Low Power or Power Cutout
3406E and 3456 Generator Set Engines User Defined Shutdown Input Circuit - Test
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Remove - Type 1 and Type 2
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Install - Type 1 and Type 2
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Remove - Rubber Impeller
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Install - Rubber Impeller
Product Link - PL102C Position Reports Not Available
Product Link - PL102C Reporting Interval Erratic
C18 Generator Set Reference Material
C-15 Petroleum Engine Engine Oil Pan - Remove and Install
3406E and 3456 Generator Set Engines Speed Control (Switch) - Test
C-15 Petroleum Engine Engine Oil Cooler - Remove