Auxiliary Water Pump - Install - Rubber Impeller
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position gasket (5) on the front housing.
- Attach a suitable lifting device to auxiliary water pump (2). The weight of auxiliary water pump (2) is approximately
27 kg (60 lb) . Position the auxiliary water pump on the front housing. - Install nuts (1).
- Position the elbow on the auxiliary water pump and install clamp (3).
- Position the elbow on the auxiliary water pump and install clamp (4).
Show/hide table
Illustration 1 | g01066058 |
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Remove - Rubber Impeller
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Install - Type 1 and Type 2
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Remove - Type 1 and Type 2
3406E and 3456 Generator Set Engines User Defined Shutdown Input Circuit - Test
3126B Petroleum Engine Intermittent Low Power or Power Cutout
Product Link - PL102C Service Tools
C15 Petroleum Engines Engine Oil Pump - Install
C15 Petroleum Engines Engine Oil Pump - Remove
3126B Petroleum Engine Intermittent Engine Shutdown
3406E and 3456 Generator Set Engines Digital Sensor Supply Circuit - Test
G3520C and G3520E Generator Set Engines Generator Output Power Readings Do Not Match
2004/05/01 Procedure to Allow Clearance to Install an Eaton VCTplus Clutch {1156}
Product Link - PL102C Position Reports Not Available
Product Link - PL102C Reporting Interval Erratic
C18 Generator Set Reference Material
C-15 Petroleum Engine Engine Oil Pan - Remove and Install
3406E and 3456 Generator Set Engines Speed Control (Switch) - Test
C-15 Petroleum Engine Engine Oil Cooler - Remove
C-15 Petroleum Engine Engine Oil Cooler - Install
C15 and C18 Tier 4 Final Engines Increased Engine Oil Temperature - Inspect
345C MHPU Mobile Hydraulic Power Unit Belt - Inspect/Adjust/Replace
C-15 Petroleum Engine Transmission Oil Cooler - Remove and Install
3406E and 3456 Generator Set Engines E040 Low Engine Oil Pressure Shutdown
3406E and 3456 Generator Set Engines E100 Low Engine Oil Pressure Warning