Fuel Filter Base - Disassemble
开始:
- 拆卸燃油滤清器底座。 请参阅拆解和组装, "燃油滤清器底座 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将燃油旁通阀 (2) 从燃油滤清器底座组件 (1) 上拆下。 将 O 形密封圈从燃油旁通阀上拆下。
- 将燃油单向阀 (5) 从燃油滤清器底座组件 (1) 上拆下。 将 O 形密封圈从燃油单向阀上拆下。
- 将接头 (3) 从燃油滤清器底座组件 (1) 上拆下。 将 O 形密封圈从接头上拆下。
- 如有必要,将空心螺柱 (4) 从燃油滤清器底座组件 (1) 上拆下。
Show/hide table
图 1 | g01063845 |
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines CID 0004 FMI 11 Cylinder #4 Injector fault
3126B Engine for Caterpillar Built Machines CID 0003 FMI 11 Cylinder #3 Injector fault
3126B Engine for Caterpillar Built Machines CID 0002 FMI 11 Cylinder #2 Injector fault
3126B Engine for Caterpillar Built Machines CID 0001 FMI 11 Cylinder #1 Injector fault
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
3126B Petroleum Engine Installation Environment
2004/04/01 The Heat Exchanger Bonnet can be Rotated on Certain Applications {1379}
3406E, C12, C15 and C18 Marine Engines Flash Codes
C7 Marine Engine Cooling System - Check - Overheating
3406E and 3456 Generator Set Engines ECM Will Not Communicate with Other Systems or Display Modules
C-15 Petroleum Engine Auxiliary Water Pump
3406E and 3456 Generator Set Engines Coolant in Engine Oil
3126B Engine for Caterpillar Built Machines CID 0005 FMI 11 Cylinder #5 Injector fault
C15 and C18 Industrial Engines Fuel Filter Base - Assemble
3126B Engine for Caterpillar Built Machines CID 0006 FMI 11 Cylinder #6 Injector fault
C15 Petroleum Engines Water Pump - Remove
C-15 Petroleum Engine Troubleshooting
C15 Petroleum Engines Water Pump - Install
3406E, C-10 and C-12 On-highway Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
C15 and C18 Industrial Engines Belt Tightener - Remove
C15 and C18 Industrial Engines Belt Tightener - Install
C15 and C18 Industrial Engines Belt Tightener - Disassemble
C15 and C18 Industrial Engines Belt Tightener - Assemble
C-15 Petroleum Engine Fuel System - Prime