Installation Environment
This engine is for use as a component in ATEX Directive (94/9/EC) Group II, 3G environments with Gas Group IIB, Temperature Class T3 (200 Deg. C maximum surface temperature). This environmental classification is described as an area that is not likely to experience an explosive atmosphere. Gases, which could make the atmosphere explosive, are confined in a closed system. The gas can escape with unexpected conditions and abnormal conditions only. This can create an atmosphere that is explosive. The potential hazards that are associated with this engine and used in these environments are noted in this Operation and Maintenance Manual. The Installation Guide, LEGW3354 for Petroleum ATEX Engines as a component, and the following publications for this engine should also be read and understood.
- Specifications Manual, SENR9962
- Systems Operation/Testing and Adjusting, SENR9963
- Troubleshooting Guide, RENR9300
- Disassembly and Assembly, RENR
Caterpillar Information System:
2004/04/01 The Heat Exchanger Bonnet can be Rotated on Certain Applications {1379}
3406E, C12, C15 and C18 Marine Engines Flash Codes
C7 Marine Engine Cooling System - Check - Overheating
3406E and 3456 Generator Set Engines ECM Will Not Communicate with Other Systems or Display Modules
C-15 Petroleum Engine Auxiliary Water Pump
3406E and 3456 Generator Set Engines Coolant in Engine Oil
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Dual Turbochargers
3406E, C-10 and C-12 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
G3520C and G3520E Generator Set Engines Turbocharger - Disassemble - Dual Turbochargers
3406E and 3456 Generator Set Engines Engine Cranks but Will Not Start
G3520C and G3520E Generator Set Engines Turbocharger - Install
3406E and 3456 Generator Set Engines Sensors and Electrical Connectors
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
3126B Engine for Caterpillar Built Machines CID 0001 FMI 11 Cylinder #1 Injector fault
3126B Engine for Caterpillar Built Machines CID 0002 FMI 11 Cylinder #2 Injector fault
3126B Engine for Caterpillar Built Machines CID 0003 FMI 11 Cylinder #3 Injector fault
3126B Engine for Caterpillar Built Machines CID 0004 FMI 11 Cylinder #4 Injector fault
C15 and C18 Industrial Engines Fuel Filter Base - Disassemble
3126B Engine for Caterpillar Built Machines CID 0005 FMI 11 Cylinder #5 Injector fault
C15 and C18 Industrial Engines Fuel Filter Base - Assemble
3126B Engine for Caterpillar Built Machines CID 0006 FMI 11 Cylinder #6 Injector fault
C15 Petroleum Engines Water Pump - Remove
C-15 Petroleum Engine Troubleshooting
C15 Petroleum Engines Water Pump - Install