Turbocharger - Disassemble - Dual Turbochargers
拆解步骤
开始:
- 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 标记三个涡轮增压器壳体以便在组装时对准标记。
Show/hide table
图 1 | g01063565 |
- 卸下螺栓 (2) 。
- 从阀芯组件 (4) 拆下压气机壳体 (1) 和扩散板 (3) 。 压气机壳体的重量约为 25 kg (55 lb)。
注: 压气机叶轮叶片具有锋利的边缘。 小心处理。
- 拆下螺栓 (6) 。
- 从阀芯组件 (4) 上拆下涡轮机壳体 (7) 和喷嘴环 (5) 。 涡轮壳体的重量约为 40 kg (90 lb)。 阀芯组件的重量约为 30 kg (70 lb)。
注: 涡轮叶片具有锋利的边缘。 小心处理。
Caterpillar Information System:
3406E and 3456 Generator Set Engines Engine Cranks but Will Not Start
G3520C and G3520E Generator Set Engines Turbocharger - Install
3406E and 3456 Generator Set Engines Sensors and Electrical Connectors
G3520C and G3520E Generator Set Engines Turbocharger - Remove
3406E, C-10 and C-12 On-highway Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Marine Engine Electric Starting System - Test
C7 Engines for Caterpillar Built Machines Water Temperature Regulator - Test
C7 Marine Engine Cooling System - Inspect
C11 and C13 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C27 and C32 Industrial Engines Monitoring System - If Equipped
3512B and 3516B High Displacement Locomotive Engines Refill Capacities and Recommendations
2004/04/01 Revised Special Instruction, REHS2115, "Requirements for Installation of the 197-6700 Piston " is Available {1214, 1216}
3406E, C-10 and C-12 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Dual Turbochargers
3406E and 3456 Generator Set Engines Coolant in Engine Oil
C-15 Petroleum Engine Auxiliary Water Pump
3406E and 3456 Generator Set Engines ECM Will Not Communicate with Other Systems or Display Modules
C7 Marine Engine Cooling System - Check - Overheating
3406E, C12, C15 and C18 Marine Engines Flash Codes
2004/04/01 The Heat Exchanger Bonnet can be Rotated on Certain Applications {1379}
3126B Petroleum Engine Installation Environment
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
3126B Engine for Caterpillar Built Machines CID 0001 FMI 11 Cylinder #1 Injector fault
3126B Engine for Caterpillar Built Machines CID 0002 FMI 11 Cylinder #2 Injector fault