Usage:
start by:
a) remove hood
1. Drain the coolant from the radiator.
2. Remove the left and right fan guards and remove top shields (4).
3. Disconnect hose (1) and water line (2).
4. Remove two bolts (3) from each side of the core.
5. Remove the front section of the crankcase guard and disconnect oil line (7) from under the radiator.
6. Disconnect lower pipe (6) and remove lower left shield (5) from the radiator.
7. Remove bolts (9) and lockwashers from lower right shield (8).
8. Remove two bolts (10) from each side of the radiator, that hold the bar to the core. Remove bolts on each side of the radiator that hold bracket (11) to the radiator guard.
9. Pull the bracket and the bar out of the way before the removal of the core.
10. Install two 3/8"-16 NC forged eyebolts in the top of the core and fasten a hoist to the eyebolts.
11. Remove radiator core (12). Weight of core is 325 lb. (146 kg).
Install Radiator Core
1. Fasten a hoist to two 3/8"-16 NC forged eyebolts in the radiator core. Put radiator core (1) in position on the guard and install the two bolts on each side of the core to hold it in place.
2. Install the bolts and lockwashers to hold lower right shield (2).
3. Put bar (3) and bracket (4) in position on both sides of the radiator and install the bolts to hold the bar and the bracket to the core and guard, respectively.
4. Connect lower pipe (5) and oil line (6). Install lower left shield to the radiator and install the front section of the crankcase guard.
5. Connect pipe (7) and upper oil line (8).
6. Install the upper right and left top shields and the left and right fan guards.
7. Fill the cooling system with coolant to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.
end by:
a) install hood